think this site will help you figure out thew port number.
www.isi.edu/in-notes/iana/assignments/port-numbers
-
"jeremy cassidy"
<jeremy_cassidy@mindl To: "Firewalls"
<[EMAIL PROTECTED]>, "rym"
ink.bc.ca> <[EMAIL PROTECTED]>
Sent by: cc:
firewalls-owner@Lists Subject: RE: ACL
.GNAC.NET
04/04/01 12:43 PM
allow 6667 most servers are 6667 to 6669 sum are 7000
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of rym
Sent: April 4, 2001 11:54 AM
To: [EMAIL PROTECTED]
Subject: ACL
Hi guys,
I know this is to easy for you guys. But im wondering on how to
enable our client to use mirc with this simple access list below.
access-list 101 permit tcp any 203.167.2.0 0.0.0.255 eq 8888
access-list 101 permit tcp any 203.167.2.0 0.0.0.255 eq ftp
access-list 101 permit tcp any 203.167.2.0 0.0.0.255 eq smtp
access-list 101 permit tcp any 203.167.2.0 0.0.0.255 eq domain
access-list 101 permit tcp any 203.167.2.0 0.0.0.255 eq 80
access-list 101 permit ip any any establish
access-list 101 permit icmp any any
access-list 101 deny ip 203.167.2.0 0.0.0.255 any
BTW, my router is cisco 2520 running on IOS 11.0 (9)
thanks
rym
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
