> I have created a new NAT rule which worked fine this morning, but now has
ceased to function without any changes to the
> firewall. I have also checked the machine internally and all seems fine.
> Here is the strange bit though .... if I move that NAT rule up the order
(it was at the bottom of the order, but before the > dynamic rules) it cuts
out all other NAT below it. I.e any other static NAT listed below will not
function.
> I tried plenty of options .... even letting all protocols through from the
internet to this server with no luck.
> I running out of possible things I can try though.
Can you send us the config line from BALI?
Also, you could log in on the console port and use "sh iptrace on" to show
if packets are being dropped...
My first guess would be that the problem is somehow related to proxy-arp,
but that's hard to say without the config :-)
--
Mit freundlichen Gr��en / Yours sincerely
Juergen Nieveler
Encrease AG
Team eCommerce
Tel.: +49/241/16008-327
Fax: +49/241/16008-354
Email: [EMAIL PROTECTED]
Web: www.encrease.de
PGP:
2AAB A988 0B80 D53F FC53 3BED 8CC0 2092 922D 8378 (DH)
5ADF A15E 91E4 98DB 2391 0D29 8B08 A884 (RSA)
Disclaimer: Views are mine, not my employers�
-
[To unsubscribe, send mail to [EMAIL PROTECTED] with
"unsubscribe firewalls" in the body of the message.]
