I have done this using free radius on solaris.
The documentation for compiling and configuring the daemon is pretty good. For Cisco remember to set Service type = NAS-prompt-user. For the pix, here are a few url's from Cisco to walk you thru setup. http://www.cisco.com/warp/public/110/cvpn3k_pix_ias.html http://www.cisco.com/warp/public/110/atp52.html http://www.cisco.com/warp/public/110/pixcryaaa52.shtml For radius aaa on IOS (12.0 and up) aaa new-model aaa authentication login default group radius aaa authentication login localauth local aaa authentication ppp default if-needed group radius aaa authorization exec default group radius aaa authorization network default group radius aaa accounting delay-start aaa accounting exec default start-stop group radius aaa accounting network default start-stop group radius aaa processes 6 radius-server host a.b.c.d auth-port 1645 acct-port 1646 radius-server retransmit 3 radius-server key xxxxxxxx HTH Glenn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tenorio, Leandro Sent: Thursday, February 14, 2002 12:29 PM To: '[EMAIL PROTECTED]' Subject: Radius in PIX Has anyone try to make a VPN (PPTP) using Radius auth? what radius attributes expect? I'm trying to configure but in the radius server saids that attribute expected in PIX is not defined. � Thanks to all _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls
