Len,
The 506 and the 515 are 100% configuration compatible.
All you need to do is write the configuration from your current PIX to a
TFTP server (write net <tftp_ip:filename> and then copy the configuration
into a telnet session after issuing a "config term" command. Make sure the
new PIX has a blank config ("write erase" first) and save the config on
the new PIX ("write mem").
Liberty for All,
Brian
At 12:01 PM 3/20/2002 -0800, "Len Cockayne" <[EMAIL PROTECTED]> wrote:
>Message: 3
>From: "Len Cockayne" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Subject: Upgrading from Pix 506 to 515
>Date: Wed, 20 Mar 2002 11:14:49 -0800
>
>Hi all Im new to Pix Firewals and have a couple ?'s.
>
>I need to upgrade a Pix 506 with an Pix 515 is the configuration compatible
>if I use the write to net from the 506 and then use the config net command
>to load it into the 515 or is there another way to get the running config
>from the 506 into the 515.
>
>I need to keep the VPN tunnels and keys intact if there is anyway possible.
>Your suggestions to help in this matter greatly appreciated.
>
>Len
>Sysadmin
>[EMAIL PROTECTED]
>
_______________________________________________
Firewalls mailing list
[EMAIL PROTECTED]
http://lists.gnac.net/mailman/listinfo/firewalls
