best would be using a terminal program and insert the new/old config by cut and paste at the console. you must set the interfaces to 100full (or auto), that's the only difference at config. the problem at "conf net": the active configuration will be overwritten while loading via tftp. if you want change the ip addresses of interfaces, the tftp will stop at this line. the rest of configuration is missing.
i don't want repeat my phrase about the manufacturer and feature requests... regards dirk Len Cockayne wrote: > Hi all Im new to Pix Firewals and have a couple ?'s. > > I need to upgrade a Pix 506 with an Pix 515 is the configuration compatible > if I use the write to net from the 506 and then use the config net command > to load it into the 515 or is there another way to get the running config > from the 506 into the 515. > > I need to keep the VPN tunnels and keys intact if there is anyway possible. > Your suggestions to help in this matter greatly appreciated. > > Len > Sysadmin > [EMAIL PROTECTED] > > _______________________________________________ > Firewalls mailing list > [EMAIL PROTECTED] > http://lists.gnac.net/mailman/listinfo/firewalls -- energis-ISION Dirk Pfau IP Network / iSecurity Harburger Schlossstr. 1 D-21079 Hamburg Fon: +49 40 77175-538 eMail: [EMAIL PROTECTED] Web: http://www.energis-ision.com _______________________________________________ Firewalls mailing list [EMAIL PROTECTED] http://lists.gnac.net/mailman/listinfo/firewalls
