Brian,
You need either a PIX-1FE (single-port) or a PIX-4FE for 10/100 fast
ethernet. There are also options that will give you GB Ethernet
capability, such as the PIX-1GE.
Hope this helps!
Joe Rausch
Datacard Group
952.988.1068
"Brian Guild"
<[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>
Sent by: cc:
firewalls-admin@list Fax to:
s.gnac.net Subject: setting up a DMZ network
on a PIX525
03/22/2002 01:32 PM
Firewall Team,
I intend to set up a DMZ network with our new PIX525 firewall. Currently,
there are only two ethernet ports on the back, 0 and 1. I would assume
this
means I have to purchase an additional ethernet interface to configure the
DMZ network...is this correct? If so, can someone give me the model number
of the extra ethernet card I must purchase for this PIX525?
Thanks,
Brian
_______________________________________________
Firewalls mailing list
[EMAIL PROTECTED]
http://lists.gnac.net/mailman/listinfo/firewalls
_______________________________________________
Firewalls mailing list
[EMAIL PROTECTED]
http://lists.gnac.net/mailman/listinfo/firewalls
