[This message was posted by Ryan Pierce (FPL Technical Director) of FIX Protocol Ltd. <[email protected]> to the "4.4 Changes" discussion forum at http://fixprotocol.org/discuss/17. You can reply to it on-line at http://fixprotocol.org/discuss/read/9275d495 - PLEASE DO NOT REPLY BY MAIL.]
> I am sorry to intrude but was hoping you could help. I have the same > issue and "OrdStatus indicates the current status of the order" is stil > confusing to me. > > My situation is that I have an exchange sending Fix 4.4 39=5, my FIX 4.4 > engine does not support this value and so I reject the execution report. > > My interpretation is that if the exchange replace my order (off the back > of a 35=G)then the logical value for them to send would be 39=5. If this > is no longer available what value are you suggesting they use? > > Hope you can help The two most common values for OrdStatus in FIX 4.4 when ExecType=5 are 0 - New (if no shares have traded on the order) or 1 - Partially filled (if anything has traded on the order.) The FIX 4.4 spec has state change matrices that illustrate this. The Cancel/Replace examples are in sections C and D. [You can unsubscribe from this discussion group by sending a message to mailto:[email protected]] --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Financial Information eXchange" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/FIX-Protocol?hl=en -~----------~----~----~----~------~----~------~--~---
