[This message was posted by rupal shah of self <[email protected]> to the "FAST Protocol" discussion forum at http://fixprotocol.org/discuss/46. You can reply to it on-line at http://fixprotocol.org/discuss/read/d3c9453d - PLEASE DO NOT REPLY BY MAIL.]
Rolf, Thank you very much for your response. This clears all my doubts. You guys are best. Regards, Rup > Rup, the answer is yes. (pls refer to section 6.3.1 of the spec) > > /Rolf > > > your question as I parsed it: > > given a message sequence m1, m2, m3, m4, m5 where m1 uses T1, m2 > uses T2, ... > > given that the following fields are present on the wire: Field3 in m1, > Field4 in m2, Field5 in m3, Field6 in m4 > > [these fields have entries in the type dictionary "t4" and the > respective entries will be updated when encoding m1-m4] > > given that the following fields are absent on the wire in m5: Field3, > Field4, Field5, Field6 > > will their values be copied from type dictionary "t4"? > > - m5.Field3 from t4.Field3 (updated by m1.Field3) > - m5.Field4 from t4.Field4 (updated by m2.Field4) > - m5.Field5 from t4.Field5 (updated by m3.Field5) > - m5.Field6 from t4.Field6 (updated by m4.Field6) [You can unsubscribe from this discussion group by sending a message to mailto:[email protected]] -- You received this message because you are subscribed to the Google Groups "Financial Information eXchange" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/fix-protocol?hl=en.
