Hi coderz,
I've just read this post and it push me to expose my problem.
I've got a strange behaviour with the ouput window since FMX2004...
Sometimes (near always) my output window doesn't scroll to the very bottom
of the traced data. i.e. when I put a trace into an enterframe for example,
the tracing start, show the value and after 2-3s (sometimes more, sometimes
less) the output text disapear since the output window doesn't scroll
anymore...
I've checked/unchecked every options, without success.
Not a very "coding" problem but very annoying for debugging.
Any ideas ?
Thx
Guillaume BEDLEEM
keblow.com
----- Original Message -----
From: "Michael Bedar" <[EMAIL PROTECTED]>
To: "Flashcoders mailing list" <[email protected]>
Sent: Sunday, December 04, 2005 9:10 PM
Subject: Re: [Flashcoders] output gone in flash 8?
Now if MM would add a few more options in that menu, and add a param to
trace to set the level, we would be in all set...
On Dec 4, 2005, at 3:04 PM, YuriGoul wrote:
Ok, that did the trick - and I am going to feel realy stupid now.
Sorry for the noise :-$
(crawls under the blankets and holds his breath)
On 4-dec-2005, at 20:27, Michael Bedar wrote:
Also- check the "filterLevel" in the output window menu... if it's set
to None, it will behave as you describe... set it to verbose.
On Dec 4, 2005, at 2:14 PM, YuriGoul wrote:
Nope.
I can create a new empty file with no matter what settings and put a
trace comment in it. The output panel comes to the front as happens
when the trace is executed, but there is nothing in it.
On 4-dec-2005, at 19:21, Michael Bedar wrote:
I assume you did not inadvertently check "omit trace" in the publish
options?
On Dec 4, 2005, at 12:56 PM, YuriGoul wrote:
No it is not that, the actionspanel is fine.
Even erased comments and traces with profanities, but it made no
difference :-)
YuriGoul
On 4-dec-2005, at 18:48, Adrian Lynch wrote:
A colleague of mine had a similar problem with the actions panel.
It's as if
there was no code there yet he could copy and paste it into an
external app.
This was MX 2004 Pro and he's now on Flash 8...
Ade
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
YuriGoul
Sent: 04 December 2005 17:34
To: Flashcoders mailing list
Subject: [Flashcoders] output gone in flash 8?
Anyone familiar with a bug where flash 8 no longer shows visible
output in the output pannel? The output pannel still comes to the
front though, but nothing is visible. Am on osx 10.4
None of my files give visible output, not using trace, not when
having an error, and they all work fine when saved for mx2004. It
just suddenly stopped.
Tried uninstalling, removing a bunch of folders in /home/ library
and /
library and re-installing, nothing worked. Could not find anything
in
the archives, either.
TIA,
YuriGoul
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
_______________________________________________
Flashcoders mailing list
[email protected]
http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
