Yes - you can do that, all you need to know is the gradient of your slope, it start point and it's end point.
M > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Merrill, Jason > Sent: 05 January 2007 16:22 > To: Flashcoders mailing list > Subject: RE: [Flashcoders] Drag on a specific angle > > But he's talking about constraining a movie clip to be > dragged along a sloped line. Figuring out the actual slope > isn't the hard part. > > Jason Merrill > Bank of America > Learning & Organizational Effectiveness > ECM Systems Ltd, Ellifoot Park, Burstwick, East Yorkshire HU12 9DZ Tel: 01964 672000 Fax: 01964 671102 Registered in England no. 01646471 The information contained within this email expresses the views of the sender and not necessarily those of the company. It is private and confidential and may be legally privileged. It is intended solely for those authorised to receive it. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or action taken in reliance on its contents is strictly prohibited and may be unlawful. If you have received this email in error, please telephone us immediately on 01964 672000 or email a reply to highlight the error and then delete it from your system. This email may contain links to web-sites, the contents of which ECM Systems Ltd have no control over and can accept no responsibility for. Any attachments have been virus-checked before transmission; however, recipients are strongly advised to carry out their own virus checking as ECM Systems Ltd do not warrant that such attachments are virus-free. Please note that this email has been created in the knowledge that Internet email is not a secure communications medium. We advise that you understand and observe this lack of security when emailing us. ECM Systems Ltd, Ellifoot Park, Burstwick, East Yorkshire HU12 9DZ Tel: 01964 672000 Fax: 01964 671102 Registered in England no. 01646471 The information contained within this email expresses the views of the sender and not necessarily those of the company. It is private and confidential and may be legally privileged. It is intended solely for those authorised to receive it. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or action taken in reliance on its contents is strictly prohibited and may be unlawful. If you have received this email in error, please telephone us immediately on 01964 672000 or email a reply to highlight the error and then delete it from your system. This email may contain links to web-sites, the contents of which ECM Systems Ltd have no control over and can accept no responsibility for. Any attachments have been virus-checked before transmission; however, recipients are strongly advised to carry out their own virus checking as ECM Systems Ltd do not warrant that such attachments are virus-free. Please note that this email has been created in the knowledge that Internet email is not a secure communications medium. We advise that you understand and observe this lack of security when emailing us. _______________________________________________ [email protected] To change your subscription options or search the archive: http://chattyfig.figleaf.com/mailman/listinfo/flashcoders Brought to you by Fig Leaf Software Premier Authorized Adobe Consulting and Training http://www.figleaf.com http://training.figleaf.com
