Hi everyone, Through a bit of searching of other flashcoders emails I found this topic had been discussed before and my problem was accurately targeting milliseconds in the 44.1khz. I was using some MP3s encoded at 48khz.
Sorry to rehash a previous bug discussion. On Tue, Jun 24, 2008 at 1:55 PM, Shant Parseghian < [EMAIL PROTECTED]> wrote: > I should have been a little clearer. I made an MP# plater in AS3. I made a > seekbar so the user can skip to the end of the mix. I've checked and > rechecked my math, and everything looks good. I use the math to determine a > new amount of milliseconds to tell the sound object to switch the position > to like this: > > play(seekPosition); > > I am streaming in files of different bitrates. The files that are at > 192kbps are giving me a strange problem where I can't reach the end and even > if I'm providing the proper millisecond target, they are losing about 2 > minutes at the end of the stream. > > The file that was encoded at 128kbps doesn't have this same problem, I can > skip all the way to the end of the file, in fact in some instances I was > able to skip past the end of the file. This is what led me to believe that > the problem was not my math, but how Flash was receiving these files in the > stream. > > The part that confused me was I let one of the 192kbps files stream > completely without touching the seekbar and it reached the correct end of > the file, but I couldn't get it to do this after I had seeked. > > Can anyone clarify what is going on here? > > > On Fri, Jun 20, 2008 at 3:00 PM, Kerry Thompson <[EMAIL PROTECTED]> > wrote: > >> Shant Parseghian wrote: >> >> > When streaming in a MP3 with 192kbps, I was having the last couple >> minutes >> > of my mp3 cut off in Flash. Basically the mix was acting as if it was 46 >> > minutes long instead of it's real duration of 44 minutes. I made the >> bitrate >> > 96kbps and tested it again and this time the file ended 20 minutes >> early, >> > which is very confusing. Is there a standard bitrate to use while >> working >> > with Flash? Is this a bug from Adobe? >> >> Are you working in AS2 or 3? (It does seem to make a difference). >> >> In my experience, converting to mp3 almost always changes the length of >> the >> file (though. I will admit, not that drastic). >> >> You have a lot of choices with Flash, in Publish Settings -> Audio Stream >> and Audio Event. It could be that you're embedding .mp3 files in the >> library, then further compressing them. You can play around with those >> settings, but if you're bringing in audio that's already .mp3-compressed, >> you shouldn't need to compress if further in Flash. >> >> Cordially, >> >> Kerry Thompson >> >> _______________________________________________ >> Flashcoders mailing list >> [email protected] >> http://chattyfig.figleaf.com/mailman/listinfo/flashcoders >> > > _______________________________________________ Flashcoders mailing list [email protected] http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
