Seems like a carousel project to me? Have you checked out www.gotoandlearn.com
There are many parameters -----Original Message----- From: flashcoders-boun...@chattyfig.figleaf.com [mailto:flashcoders-boun...@chattyfig.figleaf.com] On Behalf Of Rodrigo Augusto Guerra Sent: Wednesday, April 22, 2009 12:11 PM To: flashcoders@chattyfig.figleaf.com Subject: [Flashcoders] loading images in a circle format.. hi all... I got a request to load some images in a circle format and once you click one image, it goes to the front. the final layout will be like this: www.alumni.org.br/tmp/rodrigo/modelo.gif my doubt is, how to divide the circle in X equally pieces.... the logic I'm thinking: divide the circle degree (360º) in X (X = number of images), then I'll get the postions to load the images then load each image in the X position, and as the reg. point is left/top by default I would have to horizontal center the loaded image in the X/Y position. when the user clocks on a image that is not the front one it will swap with the image clicked, bringing the new image to the front. but this works only if I use degrees like: if I have 360º / 6 images, I'll get each image at 60º. how discover each 60º to load the image at that point and convert it to a x/y coordinate?? but this is my logic, of course if you guys have a better suggestion to do the same thing, I 'would like to know. thanks, rodrigo. _______________________________________________ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders _______________________________________________ Flashcoders mailing list Flashcoders@chattyfig.figleaf.com http://chattyfig.figleaf.com/mailman/listinfo/flashcoders
