Hi Anol, On 16.09.2009 00:29, . . wrote: > Problem is chip not being able to be flashed, looks write-protected. > No write-enable jumpers or options in BIOS setup. > Here are the requested info's: > Motherboard: EPoX EP-8RDA3+ (Rev 2.1) > BIOS download location: > http://www.epox.ru/downloads.php?file=/data/download/bios/8rd34729.bin > > lspci -nnvvvxxx output: > ---start--- > 00:00.0 Host bridge [0600]: nVidia Corporation nForce2 AGP (different > version?) [10de:01e0] (rev c1) > [...] > 00:09.0 IDE interface [0101]: nVidia Corporation nForce2 IDE [10de:0065] (rev > a2) (prog-if 8a [Master SecP PriP]) > [...] > 01:06.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 > [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02) > [...] > ---end--- >
Very strange. It seems that the majority of PCI devices on your board is missing is the lspci output above. Are you sure you pasted the full lspci output? > flashrom -V output: > ---start--- > flashrom v0.9.1-r719 > No coreboot table found. > Found chipset "NVIDIA NForce2", enabling flash write... OK. > This chipset supports the following protocols: Non-SPI. > Calibrating delay loop... 614M loops per second, 100 myus = 201 us. OK. > [...] > Probing for Winbond W39V040A, 512 KB: probe_jedec: id1 0xda, id2 0x3d > Found chip "Winbond W39V040A" (512 KB, LPC) at physical address 0xfff80000. > No operations were specified. > Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
