Author: uwe Date: 2009-10-01 20:40:02 +0200 (Thu, 01 Oct 2009) New Revision: 742
Modified: trunk/flashrom.c trunk/ft2232_spi.c Log: Cosmetics and small coding style fixes (trivial). Also, introduce BITMODE_BITBANG_SPI to eliminate a magic value. Signed-off-by: Uwe Hermann <[email protected]> Acked-by: Uwe Hermann <[email protected]> Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-10-01 14:51:25 UTC (rev 741) +++ trunk/flashrom.c 2009-10-01 18:40:02 UTC (rev 742) @@ -563,12 +563,12 @@ return ret; } -void emergency_help_message() +void emergency_help_message(void) { fprintf(stderr, "Your flash chip is in an unknown state.\n" - "Get help on IRC at irc.freenode.net channel #flashrom or\n" - "mail [email protected]\n" - "------------------------------------------------------------\n" + "Get help on IRC at irc.freenode.net (channel #flashrom) or\n" + "mail [email protected]!\n--------------------" + "-----------------------------------------------------------\n" "DO NOT REBOOT OR POWEROFF!\n"); } Modified: trunk/ft2232_spi.c =================================================================== --- trunk/ft2232_spi.c 2009-10-01 14:51:25 UTC (rev 741) +++ trunk/ft2232_spi.c 2009-10-01 18:40:02 UTC (rev 742) @@ -29,15 +29,20 @@ #include "spi.h" #include <ftdi.h> -/* the 'H' chips can run internally at either 12Mhz or 60Mhz. - * the non-H chips can only run at 12Mhz. */ +/* + * The 'H' chips can run internally at either 12MHz or 60MHz. + * The non-H chips can only run at 12MHz. + */ #define CLOCK_5X 1 -/* in either case, the divisor is a simple integer clock divider. - * if CLOCK_5X is set, this divisor divides 30Mhz, else it - * divides 6Mhz */ -#define DIVIDE_BY 3 // e.g. '3' will give either 10Mhz or 2Mhz spi clock +/* + * In either case, the divisor is a simple integer clock divider. + * If CLOCK_5X is set, this divisor divides 30MHz, else it divides 6MHz. + */ +#define DIVIDE_BY 3 /* e.g. '3' will give either 10MHz or 2MHz SPI clock. */ +#define BITMODE_BITBANG_NORMAL 1 +#define BITMODE_BITBANG_SPI 2 static struct ftdi_context ftdic_context; @@ -76,7 +81,7 @@ if (ftdi_init(ftdic) < 0) { fprintf(stderr, "ftdi_init failed\n"); - return EXIT_FAILURE; + return EXIT_FAILURE; // TODO } if (programmer_param && !strlen(programmer_param)) { @@ -113,9 +118,9 @@ f = ftdi_usb_open(ftdic, 0x0403, ft2232_type); if (f < 0 && f != -5) { - fprintf(stderr, "Unable to open ftdi device: %d (%s)\n", f, + fprintf(stderr, "Unable to open FTDI device: %d (%s)\n", f, ftdi_get_error_string(ftdic)); - exit(-1); + exit(-1); // TODO } if (ftdi_set_interface(ftdic, ft2232_interface) < 0) { @@ -124,7 +129,7 @@ } if (ftdi_usb_reset(ftdic) < 0) { - fprintf(stderr, "Unable to reset ftdi device\n"); + fprintf(stderr, "Unable to reset FTDI device\n"); } if (ftdi_set_latency_timer(ftdic, 2) < 0) { @@ -135,13 +140,13 @@ fprintf(stderr, "Unable to set chunk size\n"); } - if (ftdi_set_bitmode(ftdic, 0x00, 2) < 0) { - fprintf(stderr, "Unable to set bitmode\n"); + if (ftdi_set_bitmode(ftdic, 0x00, BITMODE_BITBANG_SPI) < 0) { + fprintf(stderr, "Unable to set bitmode to SPI\n"); } #if CLOCK_5X printf_debug("Disable divide-by-5 front stage\n"); - buf[0] = 0x8a; /* disable divide-by-5 */ + buf[0] = 0x8a; /* Disable divide-by-5. */ if (send_buf(ftdic, buf, 1)) return -1; #define MPSSE_CLK 60.0 @@ -154,16 +159,16 @@ printf_debug("Set clock divisor\n"); buf[0] = 0x86; /* command "set divisor" */ /* valueL/valueH are (desired_divisor - 1) */ - buf[1] = (DIVIDE_BY-1) & 0xff; - buf[2] = ((DIVIDE_BY-1) >> 8) & 0xff; + buf[1] = (DIVIDE_BY - 1) & 0xff; + buf[2] = ((DIVIDE_BY - 1) >> 8) & 0xff; if (send_buf(ftdic, buf, 3)) return -1; printf("SPI clock is %fMHz\n", - (double)(MPSSE_CLK / (((DIVIDE_BY-1) + 1) * 2))); + (double)(MPSSE_CLK / (((DIVIDE_BY - 1) + 1) * 2))); - /* Disconnect TDI/DO to TDO/DI for Loopback */ - printf_debug("No loopback of tdi/do tdo/di\n"); + /* Disconnect TDI/DO to TDO/DI for loopback. */ + printf_debug("No loopback of TDI/DO TDO/DI\n"); buf[0] = 0x85; if (send_buf(ftdic, buf, 1)) return -1; @@ -180,7 +185,7 @@ if (send_buf(ftdic, buf, 3)) return -1; - printf_debug("\nft2232 chosen\n"); + // printf_debug("\nft2232 chosen\n"); buses_supported = CHIP_BUSTYPE_SPI; spi_controller = SPI_CONTROLLER_FT2232; @@ -193,7 +198,7 @@ { struct ftdi_context *ftdic = &ftdic_context; static unsigned char *buf = NULL; - int i, ret = 0; + int i = 0, ret = 0; if (writecnt > 65536 || readcnt > 65536) return SPI_INVALID_LENGTH; @@ -201,15 +206,13 @@ buf = realloc(buf, writecnt + readcnt + 100); if (!buf) { fprintf(stderr, "Out of memory!\n"); - exit(1); + exit(1); // -1 } - i = 0; - - /* minimize USB transfers by packing as many commands - * as possible together. if we're not expecting to - * read, we can assert CS, write, and deassert CS all - * in one shot. if reading, we do three separate + /* + * Minimize USB transfers by packing as many commands as possible + * together. If we're not expecting to read, we can assert CS#, write, + * and deassert CS# all in one shot. If reading, we do three separate * operations. */ printf_debug("Assert CS#\n"); @@ -221,11 +224,12 @@ buf[i++] = 0x11; buf[i++] = (writecnt - 1) & 0xff; buf[i++] = ((writecnt - 1) >> 8) & 0xff; - memcpy(buf+i, writearr, writecnt); + memcpy(buf + i, writearr, writecnt); i += writecnt; } - /* optionally terminate this batch of commands with a + /* + * Optionally terminate this batch of commands with a * read command, then do the fetch of the results. */ if (readcnt) { @@ -235,13 +239,13 @@ ret = send_buf(ftdic, buf, i); i = 0; if (ret == 0) { - /* FIXME: This is unreliable. There's no guarantee that we read - * the response directly after sending the read command. - * We may be scheduled out etc. + /* + * FIXME: This is unreliable. There's no guarantee that + * we read the response directly after sending the read + * command. We may be scheduled out etc. */ ret = get_buf(ftdic, readarr, readcnt); } - } printf_debug("De-assert CS#\n"); @@ -266,7 +270,7 @@ int i; spi_disable_blockprotect(); - /* Erase first */ + /* Erase first. */ printf("Erasing flash before programming... "); if (erase_flash(flash)) { fprintf(stderr, "ERASE FAILED!\n"); @@ -285,7 +289,7 @@ fprintf(stderr, "%s: write fail %d\n", __func__, r); return 1; } - + while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP) /* loop */; } _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
