Hi Thomas, thanks for the report.
On 03.10.2009 03:34, Buckeyne, Thomas wrote: > This was tested on a "custom" mainboard > Glad to hear. We are always interested in reports for all kinds of mainboards. It would be cool if you could supply a vendor/board name and/or description so we can add it to the supported board list, but that's not a requirement. It just makes us proud to show another special board on the list. > Of interest to the flashrom group would be that this > worked on "Intel ICH9M-E", Chip set with an Atmel "AT25DF641" 8MB chip > This flash part has status UNTESTED for operations: PROBE READ ERASE > WRITE > > <<flashrom-trace.txt>> > > After save of SPI rom image I did a cmp -l between what I put on it with > a ms-dos fpt.exe program > and the saved image => compare came out identical > Great. Looks like we can mark the chip as OK for PROBE/READ. > I will send more traces as I do write ... etc. > Yes please. If you plan to do that in the next few days, I'll hold off changing chip status until you tell us if ERASE/WRITE worked as well. > If you need / want more info I will do what I can to get it for you > We're currently working on partial flashing support (latest flashrom subversion has some code, but not for your chip). I could dive in the datasheet and add partial erase support for the AT25DF641 if you're interested in that. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
