Author: libv Date: 2009-10-05 18:07:00 +0200 (Mon, 05 Oct 2009) New Revision: 745
Modified: trunk/board_enable.c Log: Board enable for ASUS P5ND2-SLI Deluxe. This patch reorganises the board_ga_k8n_sli to create nvidia_mcp_gpio_raise, a more general routine to set these bits. Without docs, i can only assume that these memory area are gpio lines. Then it becomes easy to add support for this nForce4 SLI board. Signed-off-by: Luc Verhaegen <[email protected]> Acked-by: Martin Szulecki <[email protected]> Modified: trunk/board_enable.c =================================================================== --- trunk/board_enable.c 2009-10-05 16:04:47 UTC (rev 744) +++ trunk/board_enable.c 2009-10-05 16:07:00 UTC (rev 745) @@ -400,13 +400,30 @@ } /** + * No docs, so we are just guessing that these might be individual gpio lines. + */ +static void nvidia_mcp_gpio_raise(struct pci_dev *dev, uint8_t offset) +{ + uint16_t base; + uint8_t tmp; + + base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */ + + base += 0xC0; + + /* if anyone knows more about nvidia mcps, feel free to explain this */ + tmp = INB(base + offset); + tmp &= ~0x0F; + tmp |= 0x05; + OUTB(tmp, base + offset); +} + +/** * Suited for the Gigabyte GA-K8N-SLI: CK804 southbridge. */ static int board_ga_k8n_sli(const char *name) { struct pci_dev *dev; - uint32_t base; - uint8_t tmp; dev = pci_dev_find(0x10DE, 0x0050); /* NVIDIA CK804 LPC */ if (!dev) { @@ -414,16 +431,30 @@ return -1; } - base = pci_read_long(dev, 0x64) & 0x0000FF00; /* System control area */ + nvidia_mcp_gpio_raise(dev, 0x21); - /* if anyone knows more about nvidia lpcs, feel free to explain this */ - tmp = INB(base + 0xE1); - tmp |= 0x05; - OUTB(tmp, base + 0xE1); + return 0; +} +/** + * Suited for ASUS P5ND2-SLI Deluxe: LGA775 + nForce4 SLI + MCP04. + */ +static int board_asus_p5nd2_sli(const char *name) +{ + struct pci_dev *dev; + + dev = pci_dev_find(0x10DE, 0x0030); /* NVIDIA nForce4 ISA Bridge */ + if (!dev) { + fprintf(stderr, "\nERROR: NVIDIA ISA bridge not found.\n"); + return -1; + } + + nvidia_mcp_gpio_raise(dev, 0x10); + return 0; } + static int board_hp_dl145_g3_enable(const char *name) { /* Set GPIO lines in the Broadcom HT-1000 southbridge. */ @@ -1002,6 +1033,7 @@ {0x8086, 0x1a30, 0x1043, 0x8070, 0x8086, 0x244b, 0x1043, 0x8028, NULL, NULL, "ASUS", "P4B266", ich2_gpio22_raise}, {0x8086, 0x2570, 0x1043, 0x80F2, 0x105A, 0x3373, 0x1043, 0x80F5, NULL, NULL, "ASUS", "P4P800-E Deluxe", board_asus_p4p800}, {0x10B9, 0x1541, 0, 0, 0x10B9, 0x1533, 0, 0, "asus", "p5a", "ASUS", "P5A", board_asus_p5a}, + {0x10DE, 0x0030, 0x1043, 0x818a, 0x8086, 0x100E, 0x1043, 0x80EE, NULL, NULL, "ASUS", "P5ND2-SLI Deluxe", board_asus_p5nd2_sli}, {0x1106, 0x3149, 0x1565, 0x3206, 0x1106, 0x3344, 0x1565, 0x1202, NULL, NULL, "Biostar", "P4M80-M4", it8705_rom_write_enable}, {0x8086, 0x3590, 0x1028, 0x016c, 0x1000, 0x0030, 0x1028, 0x016c, NULL, NULL, "Dell", "S1850", ich5_gpio23_raise}, {0x1106, 0x3038, 0x1019, 0x0996, 0x1106, 0x3177, 0x1019, 0x0996, NULL, NULL, "Elitegroup", "K7VTA3", it8705f_write_enable_2e}, _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
