Hi!
I have a P4-M266 AMPTRON motherboard. It's not supported by flashrom-0.9.1. It
has SST(MPF)39SF020A.
The board looks like this:
http://www.motherboard.cz/mb/amptron/P4-M266A.htm
The wiki page says, flashrom supports PM266 - Albatron. It looks like:
http://www.motherboard.cz/mb/albatron/PM266A.htm
I attached the "./flashrom" output, and an "lspi -v -v" output.
I hope, this helps for You.
I have another motherboards, which are not supported.
Thanks for Your reply,
Gabor Szogyenyi
--------------------------Hirdetés-----------------------------
Kötelező biztosítási díjak 2010
Számolja ki és váltson kedvezőbbre!
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
Subsystem: VIA Technologies, Inc. Device 0000
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if
00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: bfd00000-dfcfffff
Capabilities: [80] Power Management version 2
Kernel modules: shpchp
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at ec00 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20
[EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. KT4AV motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
Kernel modules: i2c-viapro, via-ircc
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 32, IRQ 255
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. K7VT2 motherboard
Flags: medium devsel, IRQ 22
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine-II]
Flags: bus master, medium devsel, latency 32, IRQ 23
I/O ports at dc00 [size=256]
Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Kernel driver in use: via-rhine
Kernel modules: via-rhine
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE]
(rev 01) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device c008
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=128M]
I/O ports at c800 [size=256]
Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
Kernel modules: radeonfb
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE]
(Secondary) (rev 01)
Subsystem: ASUSTeK Computer Inc. Device c009
Flags: bus master, 66MHz, medium devsel, latency 32
Memory at c8000000 (32-bit, prefetchable) [size=128M]
Memory at dfee0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
flashrom v0.9.1-r710
No coreboot table found.
Found chipset "VIA VT8235", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... OK.
No EEPROM/flash device found.
If you know which flash chip you have, and if this version of flashrom
supports a similar flash chip, you can try to force read your chip. Run:
flashrom -f -r -c similar_supported_flash_chip filename
Note: flashrom can never write when the flash chip isn't found automatically.
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
