Author: hailfinger
Date: 2009-11-17 10:57:34 +0100 (Tue, 17 Nov 2009)
New Revision: 766

Modified:
   trunk/flash.h
   trunk/flashrom.c
   trunk/print.c
   trunk/print_wiki.c
Log:
To prepare for libflashrom I wanted to make the main loop more readable
and more correct and factor out stuff which can be useful in
libflashrom.

- Factor out printing of supported devices to print.c.
- Adjust name of wiki printing function to fit the pattern.
- Abort if the user specified --verify and --noverify at the same time.
- Check for extra parameters which don't fit commandline syntax.

Signed-off-by: Carl-Daniel Hailfinger <[email protected]>
Acked-by: Stefan Reinauer <[email protected]>


Modified: trunk/flash.h
===================================================================
--- trunk/flash.h       2009-11-16 21:22:24 UTC (rev 765)
+++ trunk/flash.h       2009-11-17 09:57:34 UTC (rev 766)
@@ -338,11 +338,9 @@
 
 /* print.c */
 char *flashbuses_to_text(enum chipbustype bustype);
-void print_supported_chips(void);
-void print_supported_chipsets(void);
-void print_supported_boards(void);
+void print_supported(void);
 void print_supported_pcidevs(struct pcidev_status *devs);
-void print_wiki_tables(void);
+void print_supported_wiki(void);
 
 /* board_enable.c */
 void w836xx_ext_enter(uint16_t port);

Modified: trunk/flashrom.c
===================================================================
--- trunk/flashrom.c    2009-11-16 21:22:24 UTC (rev 765)
+++ trunk/flashrom.c    2009-11-17 09:57:34 UTC (rev 766)
@@ -801,14 +801,25 @@
                        write_it = 1;
                        break;
                case 'v':
+                       //FIXME: gracefully handle superfluous -v
                        if (++operation_specified > 1) {
                                fprintf(stderr, "More than one operation "
                                        "specified. Aborting.\n");
                                exit(1);
                        }
+                       if (dont_verify_it) {
+                               fprintf(stderr, "--verify and --noverify are"
+                                       "mutually exclusive. Aborting.\n");
+                               exit(1);
+                       }
                        verify_it = 1;
                        break;
                case 'n':
+                       if (verify_it) {
+                               fprintf(stderr, "--verify and --noverify are"
+                                       "mutually exclusive. Aborting.\n");
+                               exit(1);
+                       }
                        dont_verify_it = 1;
                        break;
                case 'c':
@@ -896,29 +907,13 @@
        }
 
        if (list_supported) {
-               print_supported_chips();
-               print_supported_chipsets();
-               print_supported_boards();
-               printf("\nSupported PCI devices flashrom can use "
-                      "as programmer:\n\n");
-#if NIC3COM_SUPPORT == 1
-               print_supported_pcidevs(nics_3com);
-#endif
-#if GFXNVIDIA_SUPPORT == 1
-               print_supported_pcidevs(gfx_nvidia);
-#endif
-#if DRKAISER_SUPPORT == 1
-               print_supported_pcidevs(drkaiser_pcidev);
-#endif
-#if SATASII_SUPPORT == 1
-               print_supported_pcidevs(satas_sii);
-#endif
+               print_supported();
                exit(0);
        }
 
 #if PRINT_WIKI_SUPPORT == 1
        if (list_supported_wiki) {
-               print_wiki_tables();
+               print_supported_wiki();
                exit(0);
        }
 #endif
@@ -930,6 +925,11 @@
 
        if (optind < argc)
                filename = argv[optind++];
+       
+       if (optind < argc) {
+               printf("Error: Extra parameter found.\n");
+               usage(argv[0]);
+       }
 
        if (programmer_init()) {
                fprintf(stderr, "Error: Programmer initialization failed.\n");
@@ -1146,7 +1146,7 @@
                if (write_it)
                        programmer_delay(1000*1000);
                ret = verify_flash(flash, buf);
-               /* If we tried to write, and now we don't properly verify, we
+               /* If we tried to write, and verification now fails, we
                 * might have an emergency situation.
                 */
                if (ret && write_it)

Modified: trunk/print.c
===================================================================
--- trunk/print.c       2009-11-16 21:22:24 UTC (rev 765)
+++ trunk/print.c       2009-11-17 09:57:34 UTC (rev 766)
@@ -222,7 +222,28 @@
                "Laptops which have been verified to NOT work yet");
 }
 
+void print_supported(void)
+{
+               print_supported_chips();
+               print_supported_chipsets();
+               print_supported_boards();
+               printf("\nSupported PCI devices flashrom can use "
+                      "as programmer:\n\n");
+#if NIC3COM_SUPPORT == 1
+               print_supported_pcidevs(nics_3com);
+#endif
+#if GFXNVIDIA_SUPPORT == 1
+               print_supported_pcidevs(gfx_nvidia);
+#endif
+#if DRKAISER_SUPPORT == 1
+               print_supported_pcidevs(drkaiser_pcidev);
+#endif
+#if SATASII_SUPPORT == 1
+               print_supported_pcidevs(satas_sii);
+#endif
+}
 
+
 /* Please keep this list alphabetically ordered by vendor/board. */
 const struct board_info boards_ok[] = {
        /* Verified working boards that don't need write-enables. */

Modified: trunk/print_wiki.c
===================================================================
--- trunk/print_wiki.c  2009-11-16 21:22:24 UTC (rev 765)
+++ trunk/print_wiki.c  2009-11-17 09:57:34 UTC (rev 766)
@@ -539,7 +539,7 @@
        }
 }
 
-void print_wiki_tables(void)
+void print_supported_wiki(void)
 {
        time_t t = time(NULL);
 


_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to