Author: hailfinger Date: 2009-11-24 01:20:03 +0100 (Tue, 24 Nov 2009) New Revision: 772
Added: trunk/buspirate_spi.c Modified: trunk/Makefile trunk/flash.h trunk/flashrom.c trunk/spi.c trunk/spi.h Log: Add Bus Pirate SPI support to flashrom. The code should work on Linux/*BSD/MacOSX and relies on the serial code implementation in serial.c. Support for additional platforms (Windows) will have to be added to serial.c for this to work. For tests without a Bus Pirate (or with non-functional serial code) it is possible to #define FAKE_COMMUNICATION in buspirate_spi.c. Thanks to Sean Nelson for the SPI mode settings code. I tweaked it a bit to make configuration from a commandline easier should anybody want that feature. Signed-off-by: Carl-Daniel Hailfinger <[email protected]> Acked-by: Stefan Reinauer <[email protected]> Acked-by: Sean Nelson <[email protected]> Tested-by: Sean Nelson <[email protected]> Modified: trunk/Makefile =================================================================== --- trunk/Makefile 2009-11-23 19:20:11 UTC (rev 771) +++ trunk/Makefile 2009-11-24 00:20:03 UTC (rev 772) @@ -25,7 +25,7 @@ DIFF = diff PREFIX ?= /usr/local MANDIR ?= $(PREFIX)/share/man -CFLAGS ?= -Os -Wall -Werror +CFLAGS ?= -Os -Wall -Werror -g EXPORTDIR ?= . OS_ARCH = $(shell uname) @@ -89,6 +89,9 @@ # Always enable Dr. Kaiser for now. CONFIG_DRKAISER ?= yes +# Always enable Bus Pirate SPI for now. +CONFIG_BUSPIRATESPI ?= yes + # Disable wiki printing by default. It is only useful if you have wiki access. CONFIG_PRINT_WIKI ?= no @@ -138,9 +141,19 @@ OBJS += drkaiser.o endif +ifeq ($(CONFIG_BUSPIRATESPI), yes) +FEATURE_CFLAGS += -D'BUSPIRATE_SPI_SUPPORT=1' +OBJS += buspirate_spi.o +endif + +# Ugly, but there's no elif/elseif. ifeq ($(CONFIG_SERPROG), yes) OBJS += serial.o +else +ifeq ($(CONFIG_BUSPIRATESPI), yes) +OBJS += serial.o endif +endif ifeq ($(CONFIG_PRINT_WIKI), yes) FEATURE_CFLAGS += -D'PRINT_WIKI_SUPPORT=1' Added: trunk/buspirate_spi.c =================================================================== --- trunk/buspirate_spi.c (rev 0) +++ trunk/buspirate_spi.c 2009-11-24 00:20:03 UTC (rev 772) @@ -0,0 +1,358 @@ +/* + * This file is part of the flashrom project. + * + * Copyright (C) 2009 Carl-Daniel Hailfinger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <stdio.h> +#include <stdint.h> +#include <string.h> +#include <stdlib.h> +#include <ctype.h> +#include <fcntl.h> +#include "flash.h" +#include "spi.h" + +/* Change this to #define if you want to test without a serial implementation */ +#undef FAKE_COMMUNICATION + +#ifndef FAKE_COMMUNICATION +int buspirate_serialport_setup(char *dev) +{ + /* 115200bps, 8 databits, no parity, 1 stopbit */ + sp_fd = sp_openserport(dev, 115200); + return 0; +} + +int buspirate_serialport_shutdown(void) +{ + close(sp_fd); + return 0; +} + +int serialport_write(unsigned char *buf, unsigned int writecnt) +{ + int tmp = 0; + + while (tmp != writecnt) { + tmp = write(sp_fd, buf + tmp, writecnt - tmp); + if (tmp == -1) + return 1; + if (!tmp) + printf_debug("Empty write\n"); + } + + return 0; +} + +int serialport_read(unsigned char *buf, unsigned int readcnt) +{ + int tmp = 0; + + while (tmp != readcnt) { + tmp = read(sp_fd, buf + tmp, readcnt - tmp); + if (tmp == -1) + return 1; + if (!tmp) + printf_debug("Empty read\n"); + } + + return 0; +} + +int buspirate_discard_read(void) +{ + int flags; + + printf_debug("%s\n", __func__); + flags = fcntl(sp_fd, F_GETFL); + flags |= O_NONBLOCK; + fcntl(sp_fd, F_SETFL, flags); + sp_flush_incoming(); + flags &= ~O_NONBLOCK; + fcntl(sp_fd, F_SETFL, flags); + + return 0; +} +#else +#define buspirate_serialport_setup(...) 0 +#define buspirate_serialport_shutdown(...) 0 +#define serialport_write(...) 0 +#define serialport_read(...) 0 +#define buspirate_discard_read(...) 0 +#endif + +int buspirate_sendrecv(unsigned char *buf, unsigned int writecnt, unsigned int readcnt) +{ + int i, ret = 0; + + printf_debug("%s: write %i, read %i\n", __func__, writecnt, readcnt); + if (!writecnt && !readcnt) { + fprintf(stderr, "Zero length command!\n"); + return 1; + } + printf_debug("Sending"); + for (i = 0; i < writecnt; i++) + printf_debug(" 0x%02x", buf[i]); +#ifdef FAKE_COMMUNICATION + /* Placate the caller for now. */ + if (readcnt) { + buf[0] = 0x01; + memset(buf + 1, 0xff, readcnt - 1); + } + ret = 0; +#else + if (writecnt) + ret = serialport_write(buf, writecnt); + if (ret) + return ret; + if (readcnt) + ret = serialport_read(buf, readcnt); + if (ret) + return ret; +#endif + printf_debug(", receiving"); + for (i = 0; i < readcnt; i++) + printf_debug(" 0x%02x", buf[i]); + printf_debug("\n"); + return 0; +} + +int buspirate_spi_init(void) +{ + unsigned char buf[512]; + int ret = 0; + int i; + char *devpos = NULL; + char *dev = NULL; + int devlen; + + if (programmer_param && !strlen(programmer_param)) { + free(programmer_param); + programmer_param = NULL; + } + if (programmer_param) { + devpos = strstr(programmer_param, "dev="); + if (devpos) { + devpos += 4; + devlen = strcspn(devpos, ",:"); + if (devlen) { + dev = malloc(devlen + 1); + if (!dev) { + fprintf(stderr, "Out of memory!\n"); + exit(1); + } + strncpy(dev, devpos, devlen); + dev[devlen] = '\0'; + } + } + free(programmer_param); + programmer_param = NULL; + } + if (!dev) { + fprintf(stderr, "No serial device given. Use flashrom -p " + "buspiratespi:dev=/dev/ttyUSB0\n"); + return 1; + } + + ret = buspirate_serialport_setup(dev); + if (ret) + return ret; + + /* This is the brute force version, but it should work. */ + for (i = 0; i < 19; i++) { + /* Enter raw bitbang mode */ + buf[0] = 0x00; + /* Send the command, don't read the response. */ + ret = buspirate_sendrecv(buf, 1, 0); + if (ret) + return ret; + /* Read any response and discard it. */ + ret = buspirate_discard_read(); + if (ret) + return ret; + } + /* Enter raw bitbang mode */ + buf[0] = 0x00; + ret = buspirate_sendrecv(buf, 1, 5); + if (ret) + return ret; + if (memcmp(buf, "BBIO", 4)) { + fprintf(stderr, "Entering raw bitbang mode failed!\n"); + return 1; + } + printf_debug("Raw bitbang mode version %c\n", buf[4]); + if (buf[4] != '1') { + fprintf(stderr, "Can't handle raw bitbang mode version %c!\n", + buf[4]); + return 1; + } + /* Enter raw SPI mode */ + buf[0] = 0x01; + ret = buspirate_sendrecv(buf, 1, 4); + if (memcmp(buf, "SPI", 3)) { + fprintf(stderr, "Entering raw SPI mode failed!\n"); + return 1; + } + printf_debug("Raw SPI mode version %c\n", buf[3]); + if (buf[3] != '1') { + fprintf(stderr, "Can't handle raw SPI mode version %c!\n", + buf[3]); + return 1; + } + + /* Initial setup (SPI peripherals config): Enable power, CS high, AUX */ + buf[0] = 0x40 | 0xb; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while setting power/CS/AUX!\n"); + return 1; + } + + /* Set speed to 8 MHz */ + buf[0] = 0x60 | 0x7; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while setting SPI speed!\n"); + return 1; + } + + /* Set SPI config: output type, idle, clock edge, sample */ + buf[0] = 0x80 | 0xa; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while setting SPI config!\n"); + return 1; + } + + /* De-assert CS# */ + buf[0] = 0x03; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return 1; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while raising CS#!\n"); + return 1; + } + + buses_supported = CHIP_BUSTYPE_SPI; + spi_controller = SPI_CONTROLLER_BUSPIRATE; + + return 0; +} + +int buspirate_spi_shutdown(void) +{ + unsigned char buf[5]; + int ret = 0; + + /* Exit raw SPI mode (enter raw bitbang mode) */ + buf[0] = 0x00; + ret = buspirate_sendrecv(buf, 1, 5); + if (ret) + return ret; + if (memcmp(buf, "BBIO", 4)) { + fprintf(stderr, "Entering raw bitbang mode failed!\n"); + return 1; + } + printf_debug("Raw bitbang mode version %c\n", buf[4]); + if (buf[4] != '1') { + fprintf(stderr, "Can't handle raw bitbang mode version %c!\n", + buf[4]); + return 1; + } + /* Reset Bus Pirate (return to user terminal) */ + buf[0] = 0x0f; + ret = buspirate_sendrecv(buf, 1, 0); + if (ret) + return ret; + + /* Shut down serial port communication */ + ret = buspirate_serialport_shutdown(); + if (ret) + return ret; + printf_debug("Bus Pirate shutdown completed.\n"); + + return 0; +} + +int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, + const unsigned char *writearr, unsigned char *readarr) +{ + static unsigned char *buf = NULL; + int i = 0, ret = 0; + + if (writecnt > 16 || readcnt > 16 || (readcnt + writecnt) > 16) + return SPI_INVALID_LENGTH; + + /* +2 is pretty arbitrary. */ + buf = realloc(buf, writecnt + readcnt + 2); + if (!buf) { + fprintf(stderr, "Out of memory!\n"); + exit(1); // -1 + } + + /* Assert CS# */ + buf[i++] = 0x02; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return SPI_GENERIC_ERROR; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while lowering CS#!\n"); + return SPI_GENERIC_ERROR; + } + + i = 0; + buf[i++] = 0x10 | (writecnt + readcnt - 1); + memcpy(buf + i, writearr, writecnt); + i += writecnt; + memset(buf + i, 0, readcnt); + ret = buspirate_sendrecv(buf, i + readcnt, i + readcnt); + if (ret) + return SPI_GENERIC_ERROR; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while reading/writing SPI!\n"); + return SPI_GENERIC_ERROR; + } + memcpy(readarr, buf + i, readcnt); + + i = 0; + /* De-assert CS# */ + buf[i++] = 0x03; + ret = buspirate_sendrecv(buf, 1, 1); + if (ret) + return SPI_GENERIC_ERROR; + if (buf[0] != 0x01) { + fprintf(stderr, "Protocol error while raising CS#!\n"); + return SPI_GENERIC_ERROR; + } + + return ret; +} + +int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len) +{ + /* Maximum read length is 12 bytes, use 8 for now. */ + return spi_read_chunked(flash, buf, start, len, 8); +} + +/* We could do 12-byte writes, but for now we use the generic 1-byte code. */ Modified: trunk/flash.h =================================================================== --- trunk/flash.h 2009-11-23 19:20:11 UTC (rev 771) +++ trunk/flash.h 2009-11-24 00:20:03 UTC (rev 772) @@ -104,6 +104,9 @@ #if SERPROG_SUPPORT == 1 PROGRAMMER_SERPROG, #endif +#if BUSPIRATE_SPI_SUPPORT == 1 + PROGRAMMER_BUSPIRATESPI, +#endif PROGRAMMER_INVALID /* This must always be the last entry. */ }; @@ -484,6 +487,12 @@ int bitbang_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); int bitbang_spi_write_256(struct flashchip *flash, uint8_t *buf); +/* buspirate_spi.c */ +int buspirate_spi_init(void); +int buspirate_spi_shutdown(void); +int buspirate_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); +int buspirate_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len); + /* flashrom.c */ extern char *programmer_param; extern int verbose; @@ -527,6 +536,9 @@ #if DUMMY_SUPPORT == 1 SPI_CONTROLLER_DUMMY, #endif +#if BUSPIRATE_SPI_SUPPORT == 1 + SPI_CONTROLLER_BUSPIRATE, +#endif SPI_CONTROLLER_INVALID /* This must always be the last entry. */ }; extern const int spi_programmer_count; Modified: trunk/flashrom.c =================================================================== --- trunk/flashrom.c 2009-11-23 19:20:11 UTC (rev 771) +++ trunk/flashrom.c 2009-11-24 00:20:03 UTC (rev 772) @@ -204,6 +204,25 @@ }, #endif +#if BUSPIRATE_SPI_SUPPORT == 1 + { + .name = "buspiratespi", + .init = buspirate_spi_init, + .shutdown = buspirate_spi_shutdown, + .map_flash_region = fallback_map, + .unmap_flash_region = fallback_unmap, + .chip_readb = noop_chip_readb, + .chip_readw = fallback_chip_readw, + .chip_readl = fallback_chip_readl, + .chip_readn = fallback_chip_readn, + .chip_writeb = noop_chip_writeb, + .chip_writew = fallback_chip_writew, + .chip_writel = fallback_chip_writel, + .chip_writen = fallback_chip_writen, + .delay = internal_delay, + }, +#endif + {}, /* This entry corresponds to PROGRAMMER_INVALID. */ }; Modified: trunk/spi.c =================================================================== --- trunk/spi.c 2009-11-23 19:20:11 UTC (rev 771) +++ trunk/spi.c 2009-11-24 00:20:03 UTC (rev 772) @@ -100,6 +100,15 @@ }, #endif +#if BUSPIRATE_SPI_SUPPORT == 1 + { /* SPI_CONTROLLER_BUSPIRATE */ + .command = buspirate_spi_send_command, + .multicommand = default_spi_send_multicommand, + .read = buspirate_spi_read, + .write_256 = spi_chip_write_1, + }, +#endif + {}, /* This entry corresponds to SPI_CONTROLLER_INVALID. */ }; Modified: trunk/spi.h =================================================================== --- trunk/spi.h 2009-11-23 19:20:11 UTC (rev 771) +++ trunk/spi.h 2009-11-24 00:20:03 UTC (rev 772) @@ -106,6 +106,7 @@ #define JEDEC_BYTE_PROGRAM_INSIZE 0x00 /* Error codes */ +#define SPI_GENERIC_ERROR -1 #define SPI_INVALID_OPCODE -2 #define SPI_INVALID_ADDRESS -3 #define SPI_INVALID_LENGTH -4 _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
