Hi flashrom, Can anyone confirm receiving this email, and if so, is there any more information from me, or assistance from you that can get the AT26DF321 written on a ICH8M HP 2510P?
Cheers, Nando On Thu, Nov 19, 2009 at 11:32 PM, Nando <[email protected]> wrote: > Hi flashrom, > > I've patched the latest flashrom to allow me to dump my bios from Winbond > W25x32 SPI bios chip. Strange thing is I got it to work ONCE successfully, > with a dump that looks good. This worked once, in between hotswaps of the > AT25DF321 chip and I haven't been able to duplicate the read again. I get an > OPCODE 0x03 error with bios dump containg some data at starting few blocks > followed by FFs. Then I hotswap in a blank Atmel AT25DF321 and do a > > ./flashrom -w /2510P-F0A-DUMP.ROM -V > > to try to create a copy of my bios, but I get write error starting at > 0x3f0000. Now can't AT26DF321 bombs out immediately. I've documented more > details here <http://forums.mydigitallife.info/showthread.php?p=179288>. I > haven't tried writing the original W25X32 but would like to with the SLIC > 2.10 string which exists in the range after 0x3f0000 as would others in that > linked thread. > > Perhaps you can advise on how I can write that string *ONLY* into the bios? > I know VPRO has some protections it can assign to the bios too, which may > prevent that from happening. > > Regards, > Nando > >
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
