On Tue, Dec 15, 2009 at 12:06:47PM +0800, eugenehsu wrote: > > > Hi > > I used the flashrom with SB ICH9R and flash chip SST SST25VF016B, > and > > the descriptor mode is activated. The software version is > flashrom-0.9.1 > > and pciutils-3.1.4. I failed to flash the BIOS. Please > refer to the messages: > > =========================== > > DiskStation> > ./flashrom -E > > flashrom v0.9.1-r710 > > No coreboot table found. > > Found > chipset "Intel ICH9R", enabling flash write... OK. > > This chipset supports > the following protocols: LPC,FWH,SPI. > > Calibrating delay loop... OK. > > > Found chip "SST SST25VF016B" (2048 KB, SPI) at physical address > 0xffe00000. > > Erasing flash chip... ERASE FAILED at 0x00000000! > Expected=0xff, Read=0x4c, failed byte count from 0x00000000-0x001fffff: > 0x3000 > > ERASE FAILED! > > FAILED! > > ERROR at 0x00000000: Expected=0xff, > Read=0x00 > > Your flash chip is in an unknown state. > > Get help on IRC at > irc.freenode.net channel #flashrom or > > mail [email protected] > > > ------------------------------------------------------------ > > DO NOT > REBOOT OR POWEROFF! > > =========================== > > BTW, please find the > "flashrom -E -V" messages in the attachment. > > Do you know how to solve > this problem ? Thanks for your help. > > Eugene
We need at least: - exact board make and model. - lspci -vvnnxxx before we can even try to investigate this. Luc Verhaegen. _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
