Convert all messages in it87spi.c to the new message infrastructure. Change one msg_pdbg to msg_pinfo, change 7 msg_pinfo to msg_pdbg.

Signed-off-by: Sean Nelson <[email protected]>

diff --git a/it87spi.c b/it87spi.c
index 9c86075..fcbf086 100644
--- a/it87spi.c
+++ b/it87spi.c
@@ -80,7 +80,7 @@ struct superio probe_superio_ite(void)
                case 0x82:
                case 0x86:
                case 0x87:
-                       printf_debug("Found ITE SuperI/O, id %04hx\n",
+                       msg_pinfo("Found ITE SuperI/O, id %04hx\n",
                                     ret.model);
                        return ret;
                }
@@ -105,31 +105,31 @@ static uint16_t find_ite_spi_flash_port(uint16_t port, 
uint16_t id)
                enter_conf_mode_ite(port);
                /* NOLDN, reg 0x24, mask out lowest bit (suspend) */
                tmp = sio_read(port, 0x24) & 0xFE;
-               printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+               msg_pdbg("Serial flash segment 0x%08x-0x%08x %sabled\n",
                       0xFFFE0000, 0xFFFFFFFF, (tmp & 1 << 1) ? "en" : "dis");
-               printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+               msg_pdbg("Serial flash segment 0x%08x-0x%08x %sabled\n",
                       0x000E0000, 0x000FFFFF, (tmp & 1 << 1) ? "en" : "dis");
-               printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+               msg_pdbg("Serial flash segment 0x%08x-0x%08x %sabled\n",
                       0xFFEE0000, 0xFFEFFFFF, (tmp & 1 << 2) ? "en" : "dis");
-               printf("Serial flash segment 0x%08x-0x%08x %sabled\n",
+               msg_pdbg("Serial flash segment 0x%08x-0x%08x %sabled\n",
                       0xFFF80000, 0xFFFEFFFF, (tmp & 1 << 3) ? "en" : "dis");
-               printf("LPC write to serial flash %sabled\n",
+               msg_pdbg("LPC write to serial flash %sabled\n",
                       (tmp & 1 << 4) ? "en" : "dis");
                /* The LPC->SPI force write enable below only makes sense for
                 * non-programmer mode.
                 */
                /* If any serial flash segment is enabled, enable writing. */
                if ((tmp & 0xe) && (!(tmp & 1 << 4))) {
-                       printf("Enabling LPC write to serial flash\n");
+                       msg_pdbg("Enabling LPC write to serial flash\n");
                        tmp |= 1 << 4;
                        sio_write(port, 0x24, tmp);
                }
-               printf("Serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
+               msg_pdbg("Serial flash pin %i\n", (tmp & 1 << 5) ? 87 : 29);
                /* LDN 0x7, reg 0x64/0x65 */
                sio_write(port, 0x07, 0x7);
                flashport = sio_read(port, 0x64) << 8;
                flashport |= sio_read(port, 0x65);
-               printf("Serial flash port 0x%04x\n", flashport);
+               msg_pdbg("Serial flash port 0x%04x\n", flashport);
                if (programmer_param && !strlen(programmer_param)) {
                        free(programmer_param);
                        programmer_param = NULL;
@@ -137,7 +137,7 @@ static uint16_t find_ite_spi_flash_port(uint16_t port, 
uint16_t id)
                if (programmer_param && (portpos = strstr(programmer_param, 
"port="))) {
                        portpos += 5;
                        flashport = strtol(portpos, (char **)NULL, 0);
-                       printf("Forcing serial flash port 0x%04x\n", flashport);
+                       msg_pinfo("Forcing serial flash port 0x%04x\n", 
flashport);
                        sio_write(port, 0x64, (flashport >> 8));
                        sio_write(port, 0x65, (flashport & 0xff));
                }
@@ -145,7 +145,7 @@ static uint16_t find_ite_spi_flash_port(uint16_t port, 
uint16_t id)
                break;
        /* TODO: Handle more IT87xx if they support flash translation */
        default:
-               printf("SuperI/O ID %04hx is not on the controller list.\n", 
id);
+               msg_pinfo("SuperI/O ID %04hx is not on the controller list.\n", 
id);
        }
        return flashport;
 }
@@ -209,7 +209,7 @@ int it8716f_spi_send_command(unsigned int writecnt, 
unsigned int readcnt,
                busy = INB(it8716f_flashport) & 0x80;
        } while (busy);
        if (readcnt > 3) {
-               printf("%s called with unsupported readcnt %i.\n",
+               msg_pinfo("%s called with unsupported readcnt %i.\n",
                       __func__, readcnt);
                return SPI_INVALID_LENGTH;
        }
@@ -239,7 +239,7 @@ int it8716f_spi_send_command(unsigned int writecnt, 
unsigned int readcnt,
                writeenc = 0x3;
                break;
        default:
-               printf("%s called with unsupported writecnt %i.\n",
+               msg_pinfo("%s called with unsupported writecnt %i.\n",
                       __func__, writecnt);
                return SPI_INVALID_LENGTH;
        }
@@ -320,12 +320,12 @@ int it8716f_spi_chip_write_256(struct flashchip *flash, 
uint8_t *buf)
        } else {
                spi_disable_blockprotect();
                /* Erase first */
-               printf("Erasing flash before programming... ");
+               msg_pinfo("Erasing flash before programming... ");
                if (erase_flash(flash)) {
-                       fprintf(stderr, "ERASE FAILED!\n");
+                       msg_perr("ERASE FAILED!\n");
                        return -1;
                }
-               printf("done.\n");
+               msg_pinfo("done.\n");
                for (i = 0; i < total_size / 256; i++) {
                        it8716f_spi_page_program(flash, i, buf);
                }
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to