On Sun, Jan 31, 2010 at 10:27:35PM +0100, Luc Verhaegen wrote: > On Sun, Jan 31, 2010 at 09:13:07PM +0100, repository service wrote: > > Author: uwe > > Date: Sun Jan 31 21:13:06 2010 > > New Revision: 887 > > URL: http://flashrom.org/trac/coreboot/changeset/887 > > > > Log: > > Add the Tekram P6Pro-A5 board as supported (trivial). > > > > The board doesn't need a board-enable, writing works out of the box. > > > > Also, the board can only decode 256KB. I verified this by writing a 512KB > > image of random bytes (which fails), whereas 256KB of random bytes can be > > written correctly. > > > > Signed-off-by: Uwe Hermann <[email protected]> > > Acked-by: Uwe Hermann <[email protected]> > > > > Modified: > > trunk/board_enable.c > > trunk/print_wiki.c > > > > Modified: trunk/board_enable.c > > ============================================================================== > > --- trunk/board_enable.c Fri Jan 29 00:55:12 2010 (r886) > > +++ trunk/board_enable.c Sun Jan 31 21:13:06 2010 (r887) > > @@ -1235,6 +1235,7 @@ > > {0x10DE, 0x0050, 0x1297, 0x5036, 0x1412, 0x1724, 0x1297, 0x5036, NULL, > > NULL, NULL, "Shuttle", "FN25", > > 0, board_shuttle_fn25}, > > {0x1106, 0x3038, 0x0925, 0x1234, 0x1106, 0x3058, 0x15DD, 0x7609, NULL, > > NULL, NULL, "Soyo", "SY-7VCA", > > 0, board_soyo_sy_7vca}, > > {0x8086, 0x1076, 0x8086, 0x1176, 0x1106, 0x3059, 0x10f1, 0x2498, NULL, > > NULL, NULL, "Tyan", "S2498 (Tomcat K7M)", > > 0, w836xx_memw_enable_2e}, > > + {0x1106, 0x3038, 0x0925, 0x1234, 0, 0, 0, 0, NULL, > > NULL, NULL, "Tekram", "P6Pro-A5", > > 256, NULL}, > > {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, > > NULL, NULL, "VIA", "EPIA M/MII/...", > > 0, via_vt823x_gpio15_raise}, > > {0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, > > NULL, NULL, "VIA", "EPIA-N/NL", > > 0, via_vt823x_gpio9_raise}, > > {0x1106, 0x5337, 0x1458, 0xb003, 0x1106, 0x287e, 0x1106, 0x337e, NULL, > > NULL, NULL, "VIA", "PC3500G", > > 0, it87xx_probe_spi_flash}, > > Second set of ids. > > Luc Verhaegen.
Also, where are the lspci -vvnnxxx; flashrom -V and superio -deV outputs that we require for board enables? I seem unable to find them on the list. Luc Verhaegen. _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
