When attempting to flash a new version of a Bios on a Compaq Evo D510 e-pc, toreplace the old jk0101.rom, I got an error message
What can I do now ? Thank you for your help. a...@anne-desktop:~$ sudo flashrom -w jk0105.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. jk0105.rom: No such file or directory a...@anne-desktop:~$ sudo flashrom -w jk0105.rom flashrom v0.9.1-r706 No coreboot table found. Found chipset "Intel ICH4/ICH4-L", enabling flash write... OK. This chipset supports the following protocols: Non-SPI. Calibrating delay loop... OK. Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Writing flash chip... ERASE FAILED at 0x000100f7! Expected=0xff, Read=0x28, failed byte count from 0x00010000-0x0001ffff: 0xfde7 ERASE FAILED! ERASE FAILED! ERASE FAILED! ERASE FAILED! FAILED! Your flash chip is in an unknown state. Get help on IRC at irc.freenode.net channel #flashrom or mail [email protected] ------------------------------------------------------------ DO NOT REBOOT OR POWEROFF! Michel Guesdon [email protected] _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
