Hi Fabrício,
latest flashrom now has some debug output which should be helpful in providing SPI support for your MCP73 board. Could you run "flashrom -V" with flashrom revision 902 (or later) and send the output to [email protected]? Thanks. Regards, Carl-Daniel On 08.10.2009 15:23, Carl-Daniel Hailfinger wrote: > Hi Fabrício, > > [Followup to [email protected] please] > > some of us are interested in reverse engineering flashrom SPI support > for your chipset. Do you still have that board available? > > On 15.01.2009 18:12, Fabrício Ceolin wrote: > >> On Wed, Jan 14, 2009 at 9:36 PM, Peter Stuge <[email protected]> wrote: >> >> >>> Fabrício Ceolin wrote: >>> >>> >>>> We are trying to make flashrom work on >>>> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=858&CategoryID=1&DetailName=Specification&MenuID=1&LanID=0 >>>> >>>> Chipset MCP73 / SPI chip Macronix MX25L8005. >>>> >>>> We made modifications using a enable_flash_mcp55 function, but >>>> does't work. >>>> >>>> >>> First you have to figure out what chip is the SPI bus master. >>> >>> >> We made these tests. There are a superio, but the bios chip isn't connect to >> it. >> The bios chip is directly connected to the chipset MCP73. >> >> So, I need to the datasheet of MCP73 to implement it. >> >> > > Did you get any datasheets from Nvidia? > > Regards, > Carl-Daniel > > -- Developer quote of the year: "We are juggling too many chainsaws and flaming arrows and tigers." _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
