On Sun, Apr 11, 2010 at 12:23 AM, Carl-Daniel Hailfinger <[email protected]> wrote: > Hi Keith, > > thanks for your report. > > On 11.04.2010 05:17, Keith Hui wrote: >> I am sent from coreboot mailing list to help make flashrom fully >> working on my Asus P2B-LS board fully work. When I did mine, I just >> forced ASUS P2B-F as the target and it works. > > This is very strange. Can you tell us how you forced the P2B-F in flashrom? > By the usual command line parameters:
flashrom -w -f -t ASUS:P2B-F coreboot.rom >> No modification to flashrom required. >> >> The flash chip on my board is SST 39SF020 and all operations work. >> Used this setup to flash coreboot several times while booted with >> coreboot. >> >> Good news is the board enable for P2B-LS would be identical to P2B-F >> meaning a lot less work. >> > > Unless I'm mistaken, the P2B-F does not need a board enable at all. > "... the lack of board enable for P2B-LS would be identical to P2B-F" definitely means even less work. LOL So the 'LS doesn't need any board enable, just an entry somewhere. Cheers Keith _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
