BE WARNED: FLASHROM COMES WITH NO WARRANTY! THIS IS ESPECIALLY TRUE FOR LAPTOPS, AND ESPECIALLY ESPECIALLY TRUE FOR LAPTOPS WITH SHARED EC. Nevertheless, I think that trying to *read* flash contents with this patch is not more unsafe than reading without this patch. Be warned that a crashed EC might mean no fan control. Don't even *THINK* about erase/write until read works fine!
This is the first system with EC sleep support in flashrom, and the first user of the register_shutdown infrastructure. PCI match uses one out of many chips with subsystem ID Acer:0x0057, and also the northbridge (with bogus subsystem ID). DMI match added just for safety, as fiddling with the KBC is dangerous. Signed-off-by: Michael Karcher <[email protected]> --- board_enable.c | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 100 insertions(+), 0 deletions(-) diff --git a/board_enable.c b/board_enable.c index f1f7953..ce82131 100644 --- a/board_enable.c +++ b/board_enable.c @@ -29,6 +29,66 @@ #include "flash.h" /* + * Functions for EC/KBC communication + * port = 0x60 for KBC, port = 0x62 (typically) for EC + */ +static int wait_uc_writebuf_empty(uint16_t port) +{ + int count; + for (count = 0; count < 50; count++) + { + /* quit if OBF bit clear */ + if (!(INB(port + 4) & 2)) + return 0; + usleep(10000); + } + return -1; +} + +static int wait_uc_readbuf_full(uint16_t port) +{ + int count; + for (count = 0; count < 50; count++) + { + /* quit if IBF bit set */ + if (INB(port + 4) & 1) + return 0; + usleep(10000); + } + return -1; +} + +static int uc_send_command(uint16_t port, uint8_t command) +{ + if (wait_uc_writebuf_empty(port) != 0) + return -1; + OUTB(command, port + 4); + return 0; +} + +#if 0 +static int uc_send_data(uint16_t port, uint8_t command) +{ + if (wait_uc_writebuf_empty(port) != 0) + return -1; + OUTB(command, port); + return 0; +} +#endif + +static int uc_read_data(uint16_t port) +{ + if (wait_uc_readbuf_full(port) != 0) + return -1; + return INB(port); +} + +static void uc_flush_data(uint16_t port) +{ + INB(port); +} + +/* * Helper functions for many Winbond Super I/Os of the W836xx range. */ /* Enter extended functions */ @@ -1307,6 +1367,45 @@ static int it8712f_gpio3_1_raise(const char *name) return it8712f_gpio_set(32, 1); } +static void send_kbc_command(void * cmdptr) +{ + uc_send_command(0x60, *(uint8_t*)cmdptr); +} + +static int board_acer_ferrari3400(const char *name) +{ + static uint8_t enable_command = 0xAA; + uint16_t pmio_base; + struct pci_dev * dev; + + dev = pci_dev_find(0x1106, 0x3177); + if (!dev) + { + fprintf(stderr, "ERROR: %s - Can't find VT8235\n", name); + return -1; + } + pmio_base = pci_read_word(dev, 0x88) & 0xFF80; + if (pmio_base == 0 || pmio_base == 0xFF80) + { + fprintf(stderr, "ERROR: %s - invalid PMIO base %04x\n", + name, pmio_base); + return -1; + } + + usleep(100000); /* Give the user a fair chance to release enter + before killing keyboard/mouse */ + + uc_flush_data(0x60); + register_shutdown(send_kbc_command, &enable_command); + if (INB(pmio_base + 4) & 1) + uc_send_command(0x60, 0xE5); /* ACPI mode */ + else + uc_send_command(0x60, 0xD8); /* APM/legacy mode */ + + uc_read_data(0x60); /* wait for EC shutdown */ + return 0; +} + /** * Below is the list of boards which need a special "board enable" code in * flashrom before their ROM chip can be accessed/written to. @@ -1356,6 +1455,7 @@ struct board_pciid_enable board_pciid_enables[] = { {0x10de, 0x0050, 0x147b, 0x1c1a, 0, 0, 0, 0, NULL, NULL, NULL, "Abit", "KN8 Ultra", 0, NT, nvidia_mcp_gpio2_lower}, {0x10de, 0x01e0, 0x147b, 0x1c00, 0x10de, 0x0060, 0x147B, 0x1c00, NULL, NULL, NULL, "Abit", "NF7-S", 0, OK, nvidia_mcp_gpio8_raise}, {0x1106, 0x0691, 0, 0, 0x1106, 0x3057, 0, 0, NULL, "abit", "vt6x4", "Abit", "VT6X4", 0, OK, via_apollo_gpo4_lower}, + {0x1106, 0x3177, 0x1025, 0x0057, 0x1106, 0x3188, 0x1106, 0x3188, "^Ferrari 3400", NULL, NULL, "Acer", "Ferrari 3400", 0, OK, board_acer_ferrari3400}, {0x105a, 0x0d30, 0x105a, 0x4d33, 0x8086, 0x1130, 0x8086, 0, NULL, NULL, NULL, "Acorp", "6A815EPD", 0, OK, board_acorp_6a815epd}, {0x8086, 0x24D4, 0x1849, 0x24D0, 0x8086, 0x24D5, 0x1849, 0x9739, NULL, NULL, NULL, "ASRock", "P4i65GV", 0, OK, intel_ich_gpio23_raise}, {0x1022, 0x746B, 0, 0, 0, 0, 0, 0, NULL, "AGAMI", "ARUMA", "agami", "Aruma", 0, OK, w83627hf_gpio24_raise_2e}, -- 1.7.0 _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
