Hello , Subject Title is Misleading. P5GC-MX/1333 Motherboard is Supported.please add this to flashrom mediawiki
Sorry for the trouble, On Mon, Jun 14, 2010 at 2:33 AM, Prakash J Kokkatt <[email protected]>wrote: > Hello , > I am sending this report after successful flashing to latest BIOS with > flashrom tool and as per carldani(irc name) recommendation. > > <carldani> debianguy: To add your board to the list, we need some more > info (just to make sure we can exactly identify the board later). > [20:28] <debianguy> <carldani> :What info is needed. > [20:28] <carldani> debianguy: Could you send the output of "lspci > -nnvvvxxx" and a short success report (preferably also with the logs you > posted here), and exact name/revision/vendor of your mainboard to > [email protected] > > [20:29] <carldani> debianguy: Oh, and if you have superiotool installed, > "superiotool -deV" output would be really nice to have as well. > > -- > I have a 2.5 year Old Desktop PC with Asus P5GC-MX/1333 Motherboard(Intel > 945GC Chipset).Asus website verifies this Motherboard By asking to Check the > Motherboard Physically(on the Centre) to Read "Version 3.xx" For > P5GC-MX/1333 Board.There is another board *P5GC-MX* which may not be > confused with *P5GC-MX/1333*. > The Version of BIOS was 0312 Which was pretty old.the latest Version is > 0413 to which I successfully Updated. > BIOS Source: > http://support.asus.com/download/download.aspx?SLanguage=en-us > > My PC's MAC Address has changed after the flashing Procedure ,resulting in > renaming of eth0 to eth1 .This warning was also shown: > > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash before programming... Erasing flash > chip... *spi_block_erase_20 failed during command execution at address 0x0 > * > but ,showed: > >> SUCCESS. >> >> done. >> >> Programming page: >> >> COMPLETE. >> >> Verifying flash... VERIFIED. >> > > Apart from that Flashing Procedure went fine. > > Since there are few other BIOS releases between 0312 and 0413 ,I have > updated to intermediate version(0317) ,later on to Update to 0413(and I > think this step is not really needed). > Flashrom Version in Debian Repo is not the latest.So ,I built a debian > package for My use to get latest version*0.9.2-r1043 .* > -- > Here are the Outputs, Logs of the Flashing Procedure ,Hoping this > Motherboard Enters the supported list. > *flashrom Logs:* > http://flashrom.pastebin.com/aXDL9CgX > flashing: > http://flashrom.pastebin.com/Vk9rzb9S > -- > *Output of "lspci -nnvvxxx" :* > http://flashrom.pastebin.com/vDq4SWgJ > *Output of :**"superiotool -deV":* > http://flashrom.pastebin.com/wwf0E5xg > > > flashrom version used: *flashrom_0.9.2-r1043* (latest snapshot debian > package custom built) > > superiotool on Debian: > Package: superiotool > Priority: extra > Section: utils > Installed-Size: 2196 > Maintainer: Uwe Hermann <[email protected]> > Architecture: amd64 > *Version: 0.0+r5050-1* > > And I want to Convey My Thanks to This Project.I was contemplating on using > AFUDOS utility with freedos and memdisk(syslinux) and was not really > sure.flashrom turned out to be a great tool.Appreciations and Respect. > > Regards, > Prakash Jose Kokkatt > >
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
