Hi Stefan,
could I get a signoff from you for that patch? It's your code, after
all. I'll ack and commit.
On 03.06.2010 16:19, Carl-Daniel Hailfinger wrote:
> SST25LF040A support patch from Stefan Reinauer.
> Stefan tested probing.
> I changed the coding style a bit to conform to flashrom rules.
> I checked against datasheets, should work.
>
> Index: flashrom-stefan_sst25lf040a/flashchips.c
> ===================================================================
> --- flashrom-stefan_sst25lf040a/flashchips.c (Revision 1026)
> +++ flashrom-stefan_sst25lf040a/flashchips.c (Arbeitskopie)
> @@ -3817,6 +3817,34 @@
>
> {
> .vendor = "SST",
> + .name = "SST25LF040A.RES",
> + .bustype = CHIP_BUSTYPE_SPI,
> + .manufacture_id = SST_ID,
> + .model_id = SST_25VF040_REMS,
> + .total_size = 512,
> + .page_size = 256,
> + .tested = TEST_OK_PROBE,
> + .probe = probe_spi_res2,
> + .probe_timing = TIMING_ZERO,
> + .block_erasers =
> + {
> + {
> + .eraseblocks = { {4 * 1024, 128} },
> + .block_erase = spi_block_erase_20,
> + }, {
> + .eraseblocks = { {32 * 1024, 16} },
> + .block_erase = spi_block_erase_52,
> + }, {
> + .eraseblocks = { {512 * 1024, 1} },
> + .block_erase = spi_block_erase_60,
> + },
> + },
> + .write = spi_chip_write_1,
> + .read = spi_chip_read,
> + },
> +
> + {
> + .vendor = "SST",
> .name = "SST25VF040B.REMS",
> .bustype = CHIP_BUSTYPE_SPI,
> .manufacture_id = SST_ID,
> Index: flashrom-stefan_sst25lf040a/flashchips.h
> ===================================================================
> --- flashrom-stefan_sst25lf040a/flashchips.h (Revision 1026)
> +++ flashrom-stefan_sst25lf040a/flashchips.h (Arbeitskopie)
> @@ -387,7 +387,7 @@
> #define SST_25VF512A_REMS 0x48 /* REMS or RES opcode */
> #define SST_25VF010_REMS 0x49 /* REMS or RES opcode */
> #define SST_25VF020_REMS 0x43 /* REMS or RES opcode */
> -#define SST_25VF040_REMS 0x44 /* REMS or RES opcode */
> +#define SST_25VF040_REMS 0x44 /* REMS or RES opcode, same as
> SST25LF040A */
> #define SST_25VF040B 0x258D
> #define SST_25VF040B_REMS 0x8D /* REMS or RES opcode */
> #define SST_25VF080_REMS 0x80 /* REMS or RES opcode */
>
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
