Hello, Qing Pei Wang wrote: > Recently i found that the mainboard which i used(Jetway PA78VM-H-LF) > is not stable, most of the spi flashing caused data error. > the data writing is ok, but the bios data does not as the same as the > original. the SPI FLASH is Winbond W25X80A
Is the flash chip flashed onboard using flashrom, or externally by another system? If onboard, what chip is SPI bus master on the board? Is it the SB700 or some LPC->SPI bridge? //Peter _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
