Hi Vitaliy, thanks for your report. Could you download latest flashrom from svn, apply the patch from http://patchwork.coreboot.org/patch/1580/ (click on the "patch" link on that page to download it), and then run flashrom -V and send the output to [email protected] ? Thanks.
Could you also please tell us the model name of your mainboard? On 04.07.2010 07:22, Vitaliy Buchynskyy wrote: > flashrom v0.9.2-r1001 on Linux 2.6.33.5-124.fc13.x86_64 (x86_64) > [...] > DMI string system-manufacturer: "BIOSTAR Group" > DMI string system-product-name: "NF61D-A2" > DMI string system-version: "1.0" > Found ITE Super I/O, id 8716 > Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not > really supported yet. Guesswork... > ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 > Guessed flash bus type is LPC > Found SMBus device 10de:03eb at 00:01:1 > SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 > Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI > enabled. > This chipset supports the following protocols: LPC. > No IT87* serial flash segment enabled. > [...] > Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x37, id2 0x9d > Found chip "AMIC A49LF040A" (512 KB, LPC) at physical address 0xfff80000. > Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
