On 16.07.2010 14:06, Alec Wright wrote: > On Fri, 2010-07-16 at 12:55 +0200, Carl-Daniel Hailfinger wrote: > >> Add Winbond W49F020 support. This chip is used on some Xbox versions. >> >> Signed-off-by: Carl-Daniel Hailfinger <[email protected]> >> > > I had some interesting results. It didnt compile as-is, since the svn > version still has the board_enable.c:788 error, but when i applied the > patch to your modified version, it compiled fine and detected the chip: > flashrom output: http://pastebin.ca/1901707 > flashrom -V output: http://pastebin.ca/1901709 > But when I try flashrom -r test.bin, it says this: > http://pastebin.ca/1901714 then it suddenly dies, or at least > disconnects from the network, since my SSH session freezes. I could try > plugging it into a TV to test it and see what the error is, if that'd > help? > > And apparently I'm supposed to say this: > Acked-by: Alec Wright <[email protected]> >
Thanks, marked as supported for probing and committed in r1086. Remaining issues on your box: - Find out why reading hangs - Support pciutils older than version 2.2. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
