Author: hailfinger Date: Thu Jul 22 13:44:38 2010 New Revision: 1096 URL: http://flashrom.org/trac/coreboot/changeset/1096
Log: Add support for the following AMIC SPI chips: http://www.amictechnology.com/pdf/A25L20P.pdf covers: AMIC A25L05PT AMIC A25L05PU AMIC A25L10PT AMIC A25L10PU AMIC A25L20PT AMIC A25L20PU http://www.amictechnology.com/pdf/A25L16P.pdf covers: AMIC A25L16PT AMIC A25L16PU Clarify the situation surrounding the A25L40PT and A25L40PU chips which share the same RDID values, despite the fact that their erase block layouts are different. Rudolf Marek tested and confirmed the distinct erase block layouts of these chips. Add a pretty-printer for the AMIC SPI chip status register Add a generic AMIC chip type. Signed-off-by: Daniel Lenski <[email protected]> Acked-by: Carl-Daniel Hailfinger <[email protected]> Modified: trunk/flashchips.c trunk/flashchips.h trunk/spi25.c Modified: trunk/flashchips.c ============================================================================== --- trunk/flashchips.c Wed Jul 21 17:12:07 2010 (r1095) +++ trunk/flashchips.c Thu Jul 22 13:44:38 2010 (r1096) @@ -1169,14 +1169,207 @@ .read = read_memmapped, }, - /* The next two chip definitions have top/bottom boot blocks, but has no - device differentiation between the two */ + { + .vendor = "AMIC", + .name = "A25L05PT", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L05PT, + .total_size = 64, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L05PU", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L05PU, + .total_size = 64, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {64 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L10PT", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L10PT, + .total_size = 128, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 1}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L10PU", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L10PU, + .total_size = 128, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 1}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {128 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L20PT", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L20PT, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 3}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L20PU", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L20PU, + .total_size = 256, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 3}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {256 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + /* The A25L40P{T,U} chips are distinguished by their + * erase block layouts, but without any distinction in RDID. + * This inexplicable quirk was verified by Rudolf Marek + * and discussed on the flashrom mailing list on 2010-07-12. + */ { .vendor = "AMIC", .name = "A25L40PT", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40P, + .model_id = AMIC_A25L40PT, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, @@ -1208,7 +1401,7 @@ .name = "A25L40PU", .bustype = CHIP_BUSTYPE_SPI, .manufacture_id = AMIC_ID, - .model_id = AMIC_A25L40P, + .model_id = AMIC_A25L40PU, .total_size = 512, .page_size = 256, .tested = TEST_OK_PRW, @@ -1269,6 +1462,76 @@ { .vendor = "AMIC", + .name = "A25L16PT", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L16PT, + .total_size = 2048, + .page_size = 256, + .tested = TEST_UNTESTED, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {64 * 1024, 31}, + {32 * 1024, 1}, + {16 * 1024, 1}, + {8 * 1024, 1}, + {4 * 1024, 2}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", + .name = "A25L16PU", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = AMIC_A25L16PU, + .total_size = 2048, + .page_size = 256, + .tested = TEST_OK_PRW, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .block_erasers = + { + { + .eraseblocks = { + {4 * 1024, 2}, + {8 * 1024, 1}, + {16 * 1024, 1}, + {32 * 1024, 1}, + {64 * 1024, 31}, + }, + .block_erase = spi_block_erase_d8, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_60, + }, { + .eraseblocks = { {2048 * 1024, 1} }, + .block_erase = spi_block_erase_c7, + } + }, + .unlock = spi_disable_blockprotect, + .write = spi_chip_write_256, + .read = spi_chip_read, + }, + + { + .vendor = "AMIC", .name = "A29002B", .bustype = CHIP_BUSTYPE_PARALLEL, .manufacture_id = AMIC_ID_NOPREFIX, @@ -6678,6 +6941,21 @@ }, { + .vendor = "AMIC", + .name = "unknown AMIC SPI chip", + .bustype = CHIP_BUSTYPE_SPI, + .manufacture_id = AMIC_ID, + .model_id = GENERIC_DEVICE_ID, + .total_size = 0, + .page_size = 256, + .tested = TEST_BAD_PREW, + .probe = probe_spi_rdid4, + .probe_timing = TIMING_ZERO, + .write = NULL, + .read = NULL, + }, + + { .vendor = "Atmel", .name = "unknown Atmel SPI chip", .bustype = CHIP_BUSTYPE_SPI, Modified: trunk/flashchips.h ============================================================================== --- trunk/flashchips.h Wed Jul 21 17:12:07 2010 (r1095) +++ trunk/flashchips.h Thu Jul 22 13:44:38 2010 (r1096) @@ -75,8 +75,19 @@ #define AMIC_ID 0x7F37 /* AMIC */ #define AMIC_ID_NOPREFIX 0x37 /* AMIC */ -#define AMIC_A25L40P 0x2013 -#define AMIC_A25L80P 0x2014 +#define AMIC_A25L05PT 0x2020 +#define AMIC_A25L05PU 0x2010 +#define AMIC_A25L10PT 0x2021 +#define AMIC_A25L10PU 0x2011 +#define AMIC_A25L20PT 0x2022 +#define AMIC_A25L20PU 0x2012 +#define AMIC_A25L40PT 0x2013 /* Datasheet says T and U have + same device ID. Confirmed by + hardware testing. */ +#define AMIC_A25L40PU 0x2013 +#define AMIC_A25L80P 0x2014 /* Seems that no A25L80PT exists */ +#define AMIC_A25L16PT 0x2025 +#define AMIC_A25L16PU 0x2015 #define AMIC_A29002B 0x0d #define AMIC_A29002T 0x8C /* Same as A290021T */ #define AMIC_A29040B 0x86 Modified: trunk/spi25.c ============================================================================== --- trunk/spi25.c Wed Jul 21 17:12:07 2010 (r1095) +++ trunk/spi25.c Thu Jul 22 13:44:38 2010 (r1096) @@ -328,6 +328,16 @@ } /* Prettyprint the status register. Works for + * AMIC A25L series + */ +void spi_prettyprint_status_register_amic_a25l(uint8_t status) +{ + msg_cdbg("Chip status register: Status Register Write Disable " + "(SRWD) is %sset\n", (status & (1 << 7)) ? "" : "not "); + spi_prettyprint_status_register_common(status); +} + +/* Prettyprint the status register. Works for * ST M25P series * MX MX25L series */ @@ -389,6 +399,10 @@ status = spi_read_status_register(); msg_cdbg("Chip status register is %02x\n", status); switch (flash->manufacture_id) { + case AMIC_ID: + if ((flash->model_id & 0xff00) == 0x2000) + spi_prettyprint_status_register_amic_a25l(status); + break; case ST_ID: if (((flash->model_id & 0xff00) == 0x2000) || ((flash->model_id & 0xff00) == 0x2500)) _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
