Hi Paweł, On 26.07.2010 23:49, Paweł Stawicki wrote: > I tried flashrom on my netbook with this result > No EEPROM/flash device found. > > :( > netbook still works :) > > I'm attaching the result of: > sudo ./flashrom -p internal:laptop=force_I_want_a_brick -V > flashrom.txt >
Thanks. > flashrom v0.9.2-r1109 on Linux 2.6.32-21-generic (i686), built with libpci > 3.0.0, GCC 4.4.3, little endian > flashrom is free software, get the source code at http://www.flashrom.org > > Calibrating delay loop... OS timer resolution is 2 usecs, 374M loops per > second, 10 myus = 11 us, 100 myus = 95 us, 1000 myus = 938 us, 10000 myus = > 10079 us, 8 myus = 9 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "Hewlett-Packard" > DMI string system-product-name: "HP 2133" > DMI string system-version: "F.06" > DMI string baseboard-manufacturer: "Hewlett-Packard" > DMI string baseboard-product-name: "3030" > DMI string baseboard-version: "KBC Version 07.17" > DMI string chassis-type: "Notebook" > Laptop detected via DMI > Found chipset "VIA VT8237S", enabling flash write... chipset PCI ID is > 1106:3372, MMIO base at = 0xfed02000 > 0x6c: 0xffff (CLOCK/DEBUG) > Programming OPCODES... > program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 > The opmenu has opcodes 05 d8 03 02 c7 9f 01 90 > Setting BBAR is not implemented for VIA yet. > done > OK. > This chipset supports the following protocols: LPC,FWH,SPI. > Probing for Atmel AT25DF021, 256 KB: Opcode 9f not found. > run OPCODE 0x9f failed > And here flashrom complains about an opcode that should be present. Very odd. We will need to investigate this. Thanks for your report. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
