Am Montag, 26. Juli 2010 schrieb Jörg Fischer: > Hi, > > Axel Bergerhoff schrieb: > > tried several Tyan 2915 (S2915A2NRF) and S2915-E (S2915A2NRF-E) all with > > the same result. > > #1 > > Using flashrom -r to get the PROM's content and comparing that with the > > appropriate version from Tyan's website gives differences in all cases. > > That's expected behaviour. Your flash will contain serial numbers of you > board, MAC address(es) of your on-board NIC(s) and other dynamic stuff. > The flash tool form your vendor will know about this and does not touch > these specific areas. > > Flashrom on the other hand does not know anything about this and will > happily overwrite this data. > > > #2 > > Took a 2915 (S2915A2NRF) and flashed with the DOS tool offered by Tyan > > (phlash16.exe) to BIOS revision 3.00 (2915v300.rom). Then reread with > > flashrom -r and compared both files - a bunch of differencies again. I > > attached the outputs of flashrom, lspci, and superiotool for this board. > > Same issue here. > > -- Jim >
Thx. Just flashed the first one with flashrom, worked fine. Axel _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
