[Forwarding answer to mailing list] > From: Michael Cole <[email protected]> > To: Uwe Hermann <[email protected]> > Subject: Re: [flashrom] M4A79T partially compatible > > Hi Uwe, > > Yes, that was the partially. I reflashed with the mobo utility, and got the > same thing. > > Thanks again,
Thanks for the logs! > Mike > > mich...@mc-desktop:~$ lspci -nnvvvxxx > 00:00.0 Host bridge [0600]: ATI Technologies Inc RD790 Northbridge only dual > slot PCI-e_GFX and HT3 K8 part [1002:5956] > Subsystem: ATI Technologies Inc RD790 Northbridge only dual slot > PCI-e_GFX and HT3 K8 part [1002:5956] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Region 3: Memory at <ignored> (64-bit, non-prefetchable) > Capabilities: <access denied> > 00: 02 10 56 59 06 00 30 22 00 00 00 06 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 e0 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 56 59 > 30: 00 00 00 00 <skype:00000000?call> c4 00 00 00 00 00 00 00 00 00 00 00 > > 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge > (external gfx0 port A) [1002:5978] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: f8000000-fbffffff > Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > 00: 02 10 78 59 07 05 10 00 00 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00 > 20: 00 f8 f0 fb 01 d0 f1 df 00 00 00 00 00 00 00 > 00<skype:0000000000000000?call> > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 1b 00 > > 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI > express gpp port C) [1002:597c] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: f7f00000-f7ffffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > 00: 02 10 7c 59 07 05 10 00 00 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 03 03 00 d1 d1 00 00 > 20: f0 f7 f0 f7 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 07 00 > > 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI > express gpp port D) [1002:597d] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: f7e00000-f7efffff > Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > 00: 02 10 7d 59 07 05 10 00 00 00 04 06 10 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 02 02 00 c1 c1 00 00 > 20: e0 f7 e0 f7 f1 ff 01 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 07 00 > > 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA > Controller [IDE mode] [1002:4390] (prog-if 01) > Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] > [1002:4390] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 27 > Region 0: I/O ports at b000 [size=8] > Region 1: I/O ports at a000 [size=4] > Region 2: I/O ports at 9000 [size=8] > Region 3: I/O ports at 8000 [size=4] > Region 4: I/O ports at 7000 [size=16] > Region 5: Memory at f7dfe400 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ahci > Kernel modules: ahci > 00: 02 10 90 43 07 05 30 02 00 01 06 01 10 40 00 00 > 10: 01 b0 00 00 01 a0 00 00 01 90 00 00 01 80 00 00 > 20: 01 70 00 00 00 <skype:0170000000?call> e4 df f7 00 00 00 00 02 10 90 43 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00 > > 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10) > Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller > [1002:4397] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f7df6000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > 00: 02 10 97 43 06 01 <skype:021097430601?call> a0 02 00 10 03 0c 10 40 80 > 00 > 10: 00 60 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 97 43 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00 > > 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 > Controller [1002:4398] (prog-if 10) > Subsystem: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f7df7000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > 00: 02 10 98 43 17 01 <skype:021098431701?call> a0 02 00 10 03 0c 10 40 00 > 00 > 10: 00 70 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 98 43 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 01 00 00 > > 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20) > Subsystem: ATI Technologies Inc Device [1002:4397] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f7dfe800 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > 00: 02 10 96 43 16 01 <skype:021096431601?call> b0 02 00 20 03 0c 10 40 00 > 00 > 10: 00 e8 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 97 43 > 30: 00 00 00 00 <skype:00000000?call> c0 00 00 00 00 00 00 00 0a 02 00 00 > > 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 > Controller [1002:4397] (prog-if 10) > Subsystem: ATI Technologies Inc Device [1002:4398] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f7dfc000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > 00: 02 10 97 43 06 01 <skype:021097430601?call> a0 02 00 10 03 0c 10 40 80 > 00 > 10: 00 c0 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 98 43 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 > > 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 > Controller [1002:4398] (prog-if 10) > Subsystem: ATI Technologies Inc Device [1002:4399] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at f7dfd000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > 00: 02 10 98 43 17 01 <skype:021098431701?call> a0 02 00 10 03 0c 10 40 00 > 00 > 10: 00 d0 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 99 43 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 > > 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI > Controller [1002:4396] (prog-if 20) > Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller > [1002:4396] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 19 > Region 0: Memory at f7dfec00 (32-bit, non-prefetchable) [size=256] > Capabilities: <access denied> > Kernel driver in use: ehci_hcd > 00: 02 10 96 43 16 01 <skype:021096431601?call> b0 02 00 20 03 0c 10 40 00 > 00 > 10: 00 ec df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 96 43 > 30: 00 00 00 00 <skype:00000000?call> c0 00 00 00 00 00 00 00 0a 02 00 00 > > 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller > [1002:4385] (rev 3c) > Subsystem: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort+ <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > Kernel modules: i2c-piix4 > 00: 02 10 85 43 03 04 30 12 3c 00 05 0c 00 00 80 00 <skype:00008000?call> > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 85 43 > 30: 00 00 00 00 <skype:00000000?call> b0 00 00 00 00 00 00 00 00 00 00 00 > > 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE > Controller [1002:439c] (prog-if 8a [Master SecP PriP]) > Subsystem: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Interrupt: pin A routed to IRQ 16 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ff00 [size=16] > Capabilities: <access denied> > Kernel driver in use: pata_atiixp > Kernel modules: pata_atiixp > 00: 02 10 9c 43 05 00 30 02 00 8a 01 01 00 40 00 00<skype:010100400000?call> > 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 > 20: 01 ff 00 00 00 00 00 00 00 00 00 00 02 10 9c 43 > 30: 00 00 00 00 70 00 00 00 00 00 00 00 00 01 00 00 > > 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) > [1002:4383] > Subsystem: ASUSTeK Computer Inc. Device [1043:8357] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin ? routed to IRQ 16 > Region 0: Memory at f7df8000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > 00: 02 10 83 43 06 00 10 04 00 00 03 04 10 40 00 00 > 10: 04 80 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 57 83 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 07 00 00 00 > > 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host > controller [1002:439d] > Subsystem: ATI Technologies Inc Device [1002:4383] > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > 00: 02 10 9d 43 0f 00 20 02 00 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 83 43 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge > [1002:4384] (prog-if 01) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: fff00000-000fffff > Prefetchable memory behind bridge: fff00000-000fffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > 00: 02 10 84 43 05 01 <skype:021084430501?call> a0 02 00 01 04 06 00 40 81 > 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 80 22 > 20: f0 ff 00 00 f0 ff 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 > > 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 > Controller [1002:4399] (prog-if 10) > Subsystem: ATI Technologies Inc Device [1002:4396] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f7dff000 (32-bit, non-prefetchable) [size=4K] > Kernel driver in use: ohci_hcd > 00: 02 10 99 43 06 01 <skype:021099430601?call> a0 02 00 10 03 0c 10 40 00 > 00 > 10: 00 f0 df f7 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 96 43 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00 > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, > Athlon64, Sempron] HyperTransport Configuration [1022:1200] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > 00: 22 10 00 12 00 00 10 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, > Athlon64, Sempron] Address Map [1022:1201] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > 00: 22 10 01 12 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, > Athlon64, Sempron] DRAM Controller [1022:1202] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Kernel modules: amd64_edac_mod > 00: 22 10 02 12 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, > Athlon64, Sempron] Miscellaneous Control [1022:1203] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Capabilities: <access denied> > 00: 22 10 03 12 00 00 10 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 <skype:00000000?call> f0 00 00 00 00 00 00 00 00 00 00 00 > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] K10 [Opteron, > Athlon64, Sempron] Link Control [1022:1204] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > 00: 22 10 04 12 00 00 00 00 00 00 00 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 02:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. Device > [1106:3403] (prog-if 10) > Subsystem: ASUSTeK Computer Inc. Device [1043:8384] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at f7eff800 (64-bit, non-prefetchable) [size=2K] > Region 2: I/O ports at c800 [size=256] > Capabilities: <access denied> > Kernel driver in use: ohci1394 > Kernel modules: firewire-ohci, ohci1394 > 00: 06 11 03 34 07 01 10 00 00 10 00 0c 10 00 00 00 > 10: 04 f8 ef f7 00 00 00 00 01 c8 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 84 83 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 > > 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) > Subsystem: ASUSTeK Computer Inc. Device [1043:8385] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 28 > Region 0: I/O ports at d800 [size=256] > Region 2: Memory at f7fff000 (64-bit, non-prefetchable) [size=4K] > Expansion ROM at f7fc0000 [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: r8169 > Kernel modules: r8169 > 00: ec 10 68 81 07 05 10 00 01 00 00 02 10 00 00 00 > 10: 01 d8 00 00 00 00 00 00 04 f0 ff f7 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 85 83 > 30: 00 00 fc f7 40 00 00 00 00 00 00 00 0b 01 00 00 > > 04:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce > 9600 GT] [10de:0622] (rev a1) > Subsystem: ASUSTeK Computer Inc. Device [1043:82fc] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] > Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] > Region 5: I/O ports at ec00 [size=128] > [virtual] Expansion ROM at faf80000 [disabled] [size=512K] > Capabilities: <access denied> > Kernel driver in use: nvidia > Kernel modules: nvidia-current, nvidiafb, nouveau > 00: de 10 22 06 07 00 10 00 a1 00 00 03 00 00 00 00 > 10: 00 00 00 fb 0c 00 00 d0 00 00 00 00 04 00 00 f8 > 20: 00 00 00 00 01 <skype:0000000001?call> ec 00 00 00 00 00 00 43 > 10<skype:0000000000004310?call>fc 82 > 30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 00 00 > > mich...@mc-desktop:~$ sudo superiotool -deV > superiotool r3844 > Probing for ALi Super I/O at 0x3f0... > Failed. Returned data: id=0xffff, rev=0xff > Probing for ALi Super I/O at 0x370... > Failed. Returned data: id=0xffff, rev=0xff > Probing for Fintek Super I/O at 0x2e... > Failed. Returned data: vid=0xffff, id=0xffff > Probing for Fintek Super I/O at 0x4e... > Failed. Returned data: vid=0xffff, id=0xffff > Probing for ITE Super I/O (init=standard) at 0x2e... > Found ITE IT8720F (id=0x8720, rev=0x2) at 0x2e > No dump available for this Super I/O > Environment controller (0x0295) > Probing for ITE Super I/O (init=it8761e) at 0x2e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=it8228e) at 0x2e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=0x87,0x87) at 0x2e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=standard) at 0x4e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=it8761e) at 0x4e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=it8228e) at 0x4e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=0x87,0x87) at 0x4e... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=legacy/it8661f) at 0x370... > Failed. Returned data: id=0xffff, rev=0xf > Probing for ITE Super I/O (init=legacy/it8671f) at 0x370... > Failed. Returned data: id=0xffff, rev=0xf > Probing for NSC Super I/O at 0x2e... > Failed. Returned data: port=0xff, port+1=0xff > Probing for NSC Super I/O at 0x4e... > Failed. Returned data: port=0xff, port+1=0xff > Probing for NSC Super I/O at 0x15c... > Failed. Returned data: port=0xff, port+1=0xff > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370... > Failed. Returned data: id=0xff, rev=0xff > Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370... > Failed. Returned data: id=0xff, rev=0xff > Probing for Winbond Super I/O (init=0x88) at 0x2e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x89) at 0x2e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x88) at 0x4e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x89) at 0x4e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x88) at 0x3f0... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x89) at 0x3f0... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x88) at 0x370... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x89) at 0x370... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x86,0x86) at 0x370... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x87,0x87) at 0x370... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x88) at 0x250... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x89) at 0x250... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x86,0x86) at 0x250... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > Probing for Winbond Super I/O (init=0x87,0x87) at 0x250... > Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff > mich...@mc-desktop:~$ Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
