Hi Daniel, thanks for your report.
Could you please run latest flashrom from svn and check if a chip is found? We have added a few features to the MCP61 code and it should now work fine. The output of "flashrom -V" from latest flashrom would be really appreciated. On 24.08.2010 22:21, Daniel Bour wrote: > flashrom v0.9.1-r946 > DMI string system-manufacturer: "MSI" > DMI string system-product-name: "MS-7309" > DMI string system-version: "2.0" > DMI string baseboard-manufacturer: "MSI" > DMI string baseboard-product-name: "K9N6PGM2-V2 (MS-7309)" > DMI string baseboard-version: "2.0" > DMI string chassis-type: "Desktop" > Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not > really supported yet. Guesswork... > ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0 > Guessed flash bus type is LPC > Found SMBus device 10de:03eb at 00:01:1 > SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000 > Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI > enabled. > OK. > This chipset supports the following protocols: LPC. > Calibrating delay loop... 345M loops per second, 100 myus = 102 us. OK. > [...] > Probing for Winbond W49V002A, 256 KB: probe_jedec_common: id1 0xff, id2 0xff, > id1 parity violation, id1 is normal flash content, id2 is normal flash content > [...] > No EEPROM/flash device found. > That result is expected with this old version. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list flashrom@flashrom.org http://www.flashrom.org/mailman/listinfo/flashrom
