>> coreboot last image size (not ROM size) is 262144 bytes. > > Hm, I guess this string could use some clarification/rewording, it > probably just confuses most users (including myself).
I don't understand, was this quote in my message? 2010/9/7, Uwe Hermann <[email protected]>: > On Sun, Sep 05, 2010 at 06:22:42PM +0300, Tadas S wrote: >> Mainboard is MSI MS-6119. I used dmidecode 2.10. "foo.bin" replaced with >> working image filename. > > Thanks. > > >> Superiotool from coreboot isn't working right, it started the login >> console >> somehow, so the log isn't complete. Any suggestions? :) > > I don't understand the question. The superiotool output you attached > looks OK. > > >> flashrom v0.9.2-r1146 on Linux 2.6.34-ARCH (i686), built with libpci >> 3.1.7, GCC 4.5.0 20100610 (prerelease), little endian >> flashrom is free software, get the source code at http://www.flashrom.org >> >> Calibrating delay loop... OS timer resolution is 5 usecs, 199M loops per >> second, 10 myus = 13 us, 100 myus = 102 us, 1000 myus = 997 us, 10000 myus >> = 10047 us, 20 myus = 23 us, OK. >> Initializing internal programmer >> No coreboot table found. >> DMI string system-manufacturer: "" >> DMI string system-product-name: "" >> DMI string system-version: "" >> DMI string baseboard-manufacturer: "" >> DMI string baseboard-product-name: "" >> DMI string baseboard-version: "" >> DMI string chassis-type: "" > > The empty DMI strings are due to you running on coreboot (which doesn't > provide DMI tables usually). Could you retry the write operation using > the vendor BIOS and post that output? Thanks! > > >> This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE >> The test status of this chip may have been updated in the latest >> development >> version of flashrom. If you are running the latest development version, >> please email a report to [email protected] if any of the above >> operations >> work correctly for you with this flash part. Please include the flashrom >> output with the additional -V option for all operations you tested (-V, >> -Vr, >> -Vw, -VE), and mention which mainboard or programmer you tested. >> Thanks for your help! >> === > > >> coreboot last image size (not ROM size) is 262144 bytes. > > Hm, I guess this string could use some clarification/rewording, it > probably just confuses most users (including myself). > > >> Manufacturer: MSI >> Mainboard ID: MS-6119 >> Note: If the following flash access fails, try -m <vendor>:<mainboard>. >> Writing flash chip... Erasing flash chip... Looking at blockwise erase >> function 0... trying... 0x000000-0x01ffff, 0x020000-0x037fff, >> 0x038000-0x039fff, 0x03a000-0x03bfff, 0x03c000-0x03ffff, >> SUCCESS. >> Programming page: address: 0x00000000 [...] DONE >> COMPLETE. >> Verifying flash... VERIFIED. > > Looks good. > > We'll mark your board as supported soon. > > > Uwe. > -- > http://hermann-uwe.de | http://sigrok.org > http://randomprojects.org | http://unmaintained-free-software.org > _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
