I add to attach full output of dmidecode.
10 сентября 2010 г. 2:05 пользователь Alexander Mikhnovets <[email protected]> написал: > Hello. I need help. > Sorry for my English. > I used utility flashrom. I downloaded binary file with BIOS from > www.asus.com, unpacked, and runned flashrom. > > My motherboard is ASUS P5GDC-Delux. > My OS is Linux: > $ lsb_release -a > No LSB modules are available. > Distributor ID: Ubuntu > Description: Ubuntu 10.04 LTS > Release: 10.04 > Codename: lucid > $ uname -a > Linux stas-desktop 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 > 08:10:02 UTC 2010 i686 GNU/Linux > > > When I runed flashrum, I see following output: > > $ flashrom -w P5GDC-ASUS-DELUXE-1012.002.rom > flashrom v0.9.1-r946 > ERROR: Could not get I/O privileges (Operation not permitted). > You need to be root. > s...@stas-desktop:~/Рабочий стол$ sudo flashrom -w > P5GDC-ASUS-DELUXE-1012.002.rom > flashrom v0.9.1-r946 > No coreboot table found. > Found chipset "Intel ICH6/ICH6R", enabling flash write... OK. > This chipset supports the following protocols: FWH. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash chip... ERASE FAILED at > 0x00000f98! Expected=0xff, Read=0x44, failed byte count from > 0x00000000-0x00000fff: 0x4d > ERASE FAILED! > ERASE FAILED at 0x00000f98! Expected=0xff, Read=0x44, failed byte > count from 0x00000000-0x0000ffff: 0xee4d > ERASE FAILED! > FAILED! > ERASE FAILED! > FAILED! > Your flash chip is in an unknown state. > Get help on IRC at irc.freenode.net (channel #flashrom) or > mail [email protected]! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > > > Befor bios updating, I backuped old bios by command: > > $ sudo flashrom -r oldbios.dat > flashrom v0.9.1-r946 > No coreboot table found. > Found chipset "Intel ICH6/ICH6R", enabling flash write... OK. > This chipset supports the following protocols: FWH. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. > Reading flash... done. > > And after unhappy update I attempted restore old bios by command: > $ sudo flashrom -w oldbios.dat > flashrom v0.9.1-r946 > No coreboot table found. > Found chipset "Intel ICH6/ICH6R", enabling flash write... OK. > This chipset supports the following protocols: FWH. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash chip... ERASE FAILED at > 0x00000f98! Expected=0xff, Read=0x44, failed byte count from > 0x00000000-0x00000fff: 0x4d > ERASE FAILED! > ERASE FAILED at 0x00000f98! Expected=0xff, Read=0x44, failed byte > count from 0x00000000-0x0000ffff: 0xee4d > ERASE FAILED! > FAILED! > ERASE FAILED! > FAILED! > Your flash chip is in an unknown state. > Get help on IRC at irc.freenode.net (channel #flashrom) or > mail [email protected]! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > > But now I don't know what I should doing... > > Thank you for your help. > > Some other output: > $ lspci > 00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory > Controller Hub (rev 04) > 00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI > Express Root Port (rev 04) > 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) High Definition Audio Controller (rev 03) > 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) PCI Express Port 1 (rev 03) > 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) PCI Express Port 2 (rev 03) > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #1 (rev 03) > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #2 (rev 03) > 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #3 (rev 03) > 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #4 (rev 03) > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB2 EHCI Controller (rev 03) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) > 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC > Interface Bridge (rev 03) > 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) IDE Controller (rev 03) > 00:1f.2 SATA controller: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) > SATA Controller (rev 03) > 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > SMBus Controller (rev 03) > 01:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A > IEEE-1394a-2000 Controller (PHY/Link) > 01:04.0 Mass storage controller: Integrated Technology Express, Inc. > IT/ITE8212 Dual channel ATA RAID controller (rev 13) > 01:09.0 Communication controller: Conexant Systems, Inc. HCF V90 56k > Data/Fax/Voice/Spkp PCI Modem (rev 08) > 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 > PCI-E Gigabit Ethernet Controller (rev 15) > 04:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce > 6600] (rev a2) > > > $ sudo dmidecode |head -48 > # dmidecode 2.9 > SMBIOS 2.3 present. > 79 structures occupying 2440 bytes. > Table at 0x000F04C0. > > Handle 0x0000, DMI type 0, 20 bytes > BIOS Information > Vendor: American Megatrends Inc. > Version: 1010.002 > Release Date: 06/17/2005 > Address: 0xF0000 > Runtime Size: 64 kB > ROM Size: 512 kB > Characteristics: > ISA is supported > PCI is supported > PNP is supported > APM is supported > BIOS is upgradeable > BIOS shadowing is allowed > ESCD support is available > Boot from CD is supported > Selectable boot is supported > BIOS ROM is socketed > EDD is supported > 5.25"/1.2 MB floppy services are supported (int 13h) > 3.5"/720 KB floppy services are supported (int 13h) > 3.5"/2.88 MB floppy services are supported (int 13h) > Print screen service is supported (int 5h) > 8042 keyboard services are supported (int 9h) > Serial services are supported (int 14h) > Printer services are supported (int 17h) > CGA/mono video services are supported (int 10h) > ACPI is supported > USB legacy is supported > AGP is supported > LS-120 boot is supported > ATAPI Zip drive boot is supported > BIOS boot specification is supported > > Handle 0x0001, DMI type 1, 25 bytes > System Information > Manufacturer: System manufacturer > Product Name: System Product Name > Version: System Version > Serial Number: none > UUID: 20EED887-8DFE-D511-80FF-0013D4808543 > Wake-up Type: PCI PME# >
dmidecode.out
Description: Binary data
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
