Hi Shaun, thanks for your report.
On 17.09.2010 17:37, Shaun Ruffell wrote: > I've tested read/write/erase on Dell T410 and it appeared to work fine. > I initially did a flashrom -r backup.bin which appeared to work. Then > I attempted flashrom and aborted after several minutes with flashrom > taking 100% CPU. When I reread the flash, it appeared to have been > erased. I then started the write operation again and after some > patience it completed successfully. > > After talking to carldani, idwer, macavity, and flyback on #flashrom > (thanks for the help) I reverted to the original backup since this was a > remote machine and someone wasn't on site in case the BIOS wanted some > input on reboot > > The machine did not reboot and a person was sent to the location to hard > powercycle the machine, and it came up and booted fine. > Mh. That should not have happened. > ~# flashrom -V > flashrom v0.9.1-r946 > No coreboot table found. > DMI string system-manufacturer: "Dell Inc." > DMI string system-product-name: "PowerEdge T410" > DMI string system-version: "Not Specified" > DMI string baseboard-manufacturer: "Dell Inc." > DMI string baseboard-product-name: "0M638F" > DMI string baseboard-version: "A04" > DMI string chassis-type: "<OUT OF SPEC>" > Found chipset "Intel ICH10R", enabling flash write... > Which dmidecode version are you using? The chassis-type looks odd. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
