Hi Benjamin, we will help you.
On 09.10.2010 13:25, Benjamin Z. Gregorian wrote: > flashrom -w Desktop/Downloads/P5LD2-2002.ROM > flashrom v0.9.1-r946 > This flashrom version is pretty old. > Found chipset "Intel ICH7/ICH7R", enabling flash write... OK. > This chipset supports the following protocols: FWH. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address > 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash chip... > ERASE FAILED at 0x000002c8! Expected=0xff, Read=0x4c, failed byte count from > 0x00000000-0x00000fff: 0xd12 > ERASE FAILED at 0x000002c8! Expected=0xff, Read=0x4c, failed byte count from > 0x00000000-0x0000ffff: 0xfc2b > This looks like nothing changed. If you made a backup of your ROM contents, please run flashrom -Vv backup.rom If it says "VERIFIED", nothing changed and it is safe to reboot. However, we would like to add support for your mainboard.Could you please download latest flashrom (preferably flashrom 0.9.3) and run the following commands (as root), then send the output to us? flashrom -V superiotool -deV lspci -nnvvvxxx Please use the subject "yourboardname: boardenable needed" for that e-mail and mention the exact model of your mainboard including the revision, and tell us where we can find a BIOS download for it. Regards, Carl-Daniel -- http://www.hailfinger.org/ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
