Add support for the OpenMoko Neo1973/Neo FreeRunner debug board version 2 or 3 (vid:pid 1457:5118). The new type is called "openmoko".
Information about the debug board can be found at http://wiki.openmoko.org/wiki/Debug_Board_v3 Signed-off-by: Alex Badea <[email protected]> --- ft2232_spi.c | 13 +++++++++++-- 1 files changed, 11 insertions(+), 2 deletions(-) diff --git a/ft2232_spi.c b/ft2232_spi.c index 37fa231..f8ba518 100644 --- a/ft2232_spi.c +++ b/ft2232_spi.c @@ -35,10 +35,16 @@ #define FTDI_FT4232H_PID 0x6011 #define AMONTEC_JTAGKEY_PID 0xCFF8 +#define FIC_VID 0x1457 +#define OPENMOKO_DBGBOARD_PID 0x5118 + const struct usbdev_status devs_ft2232spi[] = { {FTDI_VID, FTDI_FT2232H_PID, OK, "FTDI", "FT2232H"}, {FTDI_VID, FTDI_FT4232H_PID, OK, "FTDI", "FT4232H"}, {FTDI_VID, AMONTEC_JTAGKEY_PID, OK, "Amontec", "JTAGkey"}, + {FIC_VID, OPENMOKO_DBGBOARD_PID, NT, + "First International Computer, Inc.", + "OpenMoko Neo1973 Debug board (V2+)"}, {}, }; @@ -138,8 +144,11 @@ int ft2232_spi_init(void) ft2232_interface = INTERFACE_A; cs_bits = 0x18; pindir = 0x1b; - } - else { + } else if (!strcasecmp(arg, "openmoko")) { + ft2232_vid = FIC_VID; + ft2232_type = OPENMOKO_DBGBOARD_PID; + ft2232_interface = INTERFACE_A; + } else { msg_perr("Error: Invalid device type specified.\n"); free(arg); return 1; -- 1.7.0.4 _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
