Hello Carl Daniel,
My company is interested in those chips, that's why we test them, from
time to time.
I'll request some tests on early 0.9.3, but might take some time to
provide details and results.
Anyway, these are not "UNTESTED" anymore :-)
Stéphan.
Le 21/10/2010 18:16, Carl-Daniel Hailfinger a écrit :
Hi Stephan,
thank you for testing those chips.
flashrom 0.9.3 has dynamic ICH SPI reprogramming and should be able to
use all erase methods on your machine.
Current flashrom svn HEAD has some partial write functionality, and the
latest partial write patch is available at
http://patchwork.coreboot.org/patch/2156/
On 21.10.2010 15:14, [email protected] wrote:
We successfully tested of flashrom 0.9.2 (SVN 1185) on flash Macronix MX1635d.
As required, the output of -V, -VE, -Vr and -vw are given below and in
attachement.
Thanks.
[r...@xa000000 root]# flashrom -Vw /DHS3bin/downbin/bioscs2.rom
flashrom vV092.1185 on unknown machine, built with libpci 3.1.7, GCC 2.95.3
20010315 (release), little endian
Calibrating delay loop... OK.
Initializing internal programmer
Found chipset "Intel EP80579", enabling flash write... chipset PCI ID is
8086:5031,
BIOS Lock Enable: disabled, BIOS Write Enable: enabled, BIOS_CNTL is 0x1
GCS = 0xd70260: BIOS Interface Lock-Down: disabled, BOOT BIOS Straps: 0x0
(reserved)
Programming OPCODES...
program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
done
SPI Read Configuration: prefetching disabled, caching enabled, OK.
This chipset supports the following protocols: SPI.
Probing for Macronix MX25L1635D, 2048 KB: probe_spi_rdid_generic: id1 0xc2, id2
0x2415
Chip status register is 00
Found chip "Macronix MX25L1635D" (2048 KB, SPI) at physical address 0xffe00000.
===
This flash part has status UNTESTED for operations: PROBE READ ERASE WRITE
===
Writing flash chip... Erasing flash before programming... Erasing flash chip...
Looking at blockwise erase function 0
... trying... 0x000000-0x000fff, ich_spi_send_multicommand: FIXME: Add
on-the-fly reprogramming of the chipset opcode
list.
Invalid OPCODE 0x20
spi_block_erase_20 failed during command execution at address 0x0
Yes, the invalid opcode message should not appear anymore in flashrom 0.9.3.
Regards,
Carl-Daniel
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
