Index: nicrealtek.c
===================================================================
--- nicrealtek.c	(revision 1250)
+++ nicrealtek.c	(working copy)
@@ -27,11 +27,11 @@
 #define PCI_VENDOR_ID_REALTEK	0x10ec
 #define PCI_VENDOR_ID_SMC1211	0x1113
 
-#define BIOS_ROM_ADDR		0xD4
-#define BIOS_ROM_DATA		0xD7
+static int bios_rom_addr, bios_rom_data;
 
 const struct pcidev_status nics_realtek[] = {
 	{0x10ec, 0x8139, OK, "Realtek", "RTL8139/8139C/8139C+"},
+	{0x10ec, 0x8169, OK, "Realtek", "RTL8169"},
 	{},
 };
 
@@ -42,6 +42,8 @@
 
 int nicrealtek_init(void)
 {
+	static uint16_t id;
+
 	get_io_perms();
 
 	io_base_addr = pcidev_init(PCI_VENDOR_ID_REALTEK, PCI_BASE_ADDRESS_0,
@@ -49,6 +51,16 @@
 
 	buses_supported = CHIP_BUSTYPE_PARALLEL;
 
+	id = pcidev_dev->device_id;
+	if(id == 0x8139) {
+		bios_rom_addr = 0xD4;
+		bios_rom_data = 0xD7;
+	}
+	else {
+		bios_rom_addr = 0x30;
+		bios_rom_data = 0x33;
+	}
+
 	return 0;
 }
 
@@ -61,6 +73,9 @@
 
 	buses_supported = CHIP_BUSTYPE_PARALLEL;
 
+	bios_rom_addr = 0xD4;
+	bios_rom_data = 0xD7;
+
 	return 0;
 }
 
@@ -78,12 +93,12 @@
 	 * enable software access.
 	 */
 	OUTL(((uint32_t)addr & 0x01FFFF) | 0x0A0000 | (val << 24),
-	     io_base_addr + BIOS_ROM_ADDR);
+	     io_base_addr + bios_rom_addr);
 	/* Output addr and data, set WE to 1, set OE to 1, set CS to 1,
 	 * enable software access.
 	 */
 	OUTL(((uint32_t)addr & 0x01FFFF) | 0x1E0000 | (val << 24),
-	     io_base_addr + BIOS_ROM_ADDR);
+	     io_base_addr + bios_rom_addr);
 }
 
 uint8_t nicrealtek_chip_readb(const chipaddr addr)
@@ -92,20 +107,20 @@
 
 	/* FIXME: Can we skip reading the old data and simply use 0? */
 	/* Read old data. */
-	val = INB(io_base_addr + BIOS_ROM_DATA);
+	val = INB(io_base_addr + bios_rom_data);
 	/* Output new addr and old data, set WE to 1, set OE to 0, set CS to 0,
 	 * enable software access.
 	 */
 	OUTL(((uint32_t)addr & 0x01FFFF) | 0x060000 | (val << 24),
-	     io_base_addr + BIOS_ROM_ADDR);
+	     io_base_addr + bios_rom_addr);
 
 	/* Read new data. */
-	val = INB(io_base_addr + BIOS_ROM_DATA);
+	val = INB(io_base_addr + bios_rom_data);
 	/* Output addr and new data, set WE to 1, set OE to 1, set CS to 1,
 	 * enable software access.
 	 */
 	OUTL(((uint32_t)addr & 0x01FFFF) | 0x1E0000 | (val << 24),
-	     io_base_addr + BIOS_ROM_ADDR);
+	     io_base_addr + bios_rom_addr);
 
 	return val;
 }