Author: hailfinger Date: Tue Mar 8 01:23:49 2011 New Revision: 1279 URL: http://flashrom.org/trac/flashrom/changeset/1279
Log: Various IT85* cleanups and fixes. Fix a few typos. Change the EC memory region mapping name. Drop unused function parameter. Use mmio_writeb()/mmio_readb() to get reliable access to volatile memory locations instead of plain pointer access which is optimized away by gcc. Use own it85_* SPI high-level chip read/write functions instead of relying on unrelated ICH functions. Signed-off-by: Carl-Daniel Hailfinger <[email protected]> David writes: I applied the patch against the Chromium OS branch and successfully tested read and write operations on a Cr48. Acked-by: David Hendricks <[email protected]> Modified: trunk/it85spi.c trunk/programmer.h trunk/spi.c Modified: trunk/it85spi.c ============================================================================== --- trunk/it85spi.c Tue Mar 8 01:09:11 2011 (r1278) +++ trunk/it85spi.c Tue Mar 8 01:23:49 2011 (r1279) @@ -37,7 +37,7 @@ #define MAX_TIMEOUT 100000 #define MAX_TRY 5 -/* Constans for I/O ports */ +/* Constants for I/O ports */ #define ITE_SUPERIO_PORT1 0x2e #define ITE_SUPERIO_PORT2 0x4e @@ -52,13 +52,14 @@ #define CHIP_CHIP_VER_REG 0x22 /* These are standard Super I/O 16-bit base address registers */ -#define SHM_IO_BAD0 0x60 /* big-endian, this is high bits */ -#define SHM_IO_BAD1 0x61 +#define SHM_IO_BAR0 0x60 /* big-endian, this is high bits */ +#define SHM_IO_BAR1 0x61 -/* 8042 keyboard controller uses an input buffer and an output buffer to - * communicate with host CPU. Both buffers are 1-byte depth. That means the - * IBF is set to 1 when host CPU sends a command to input buffer (standing on - * the EC side). IBF is cleared to 0 once the command is read by EC. */ +/* The 8042 keyboard controller uses an input buffer and an output buffer to + * communicate with the host CPU. Both buffers are 1-byte depth. That means + * IBF is set to 1 when the host CPU sends a command to the input buffer + * of the EC. IBF is cleared to 0 once the command is read by the EC. + */ #define KB_IBF (1 << 1) /* Input Buffer Full */ #define KB_OBF (1 << 0) /* Output Buffer Full */ @@ -278,8 +279,8 @@ #ifdef LPC_IO /* Get LPCPNP of SHM. That's big-endian */ sio_write(superio.port, LDNSEL, 0x0F); /* Set LDN to SHM (0x0F) */ - shm_io_base = (sio_read(superio.port, SHM_IO_BAD0) << 8) + - sio_read(superio.port, SHM_IO_BAD1); + shm_io_base = (sio_read(superio.port, SHM_IO_BAR0) << 8) + + sio_read(superio.port, SHM_IO_BAR1); msg_pdbg("%s():%d shm_io_base=0x%04x\n", __func__, __LINE__, shm_io_base); @@ -296,8 +297,8 @@ INDIRECT_A3(shm_io_base, (base >> 24)); #endif #ifdef LPC_MEMORY - base = (chipaddr)programmer_map_flash_region("flash base", 0xFFFFF000, - 0x1000); + base = (chipaddr)programmer_map_flash_region("it85 communication", + 0xFFFFF000, 0x1000); msg_pdbg("%s():%d base=0x%08x\n", __func__, __LINE__, (unsigned int)base); ce_high = (unsigned char*)(base + 0xE00); /* 0xFFFFFE00 */ @@ -328,7 +329,7 @@ } /* Called by internal_init() */ -int it85xx_probe_spi_flash(const char *name) +int it85xx_probe_spi_flash(void) { int ret; @@ -377,14 +378,14 @@ INDIRECT_A1(shm_io_base, (((unsigned long int)ce_low) >> 8) & 0xff); #endif #ifdef LPC_MEMORY - *ce_high = 0; + mmio_writeb(0, ce_high); #endif for (i = 0; i < writecnt; ++i) { #ifdef LPC_IO INDIRECT_WRITE(shm_io_base, writearr[i]); #endif #ifdef LPC_MEMORY - *ce_low = writearr[i]; + mmio_writeb(writearr[i], ce_low); #endif } for (i = 0; i < readcnt; ++i) { @@ -392,7 +393,7 @@ readarr[i] = INDIRECT_READ(shm_io_base); #endif #ifdef LPC_MEMORY - readarr[i] = *ce_low; + readarr[i] = mmio_readb(ce_low); #endif } #ifdef LPC_IO @@ -400,10 +401,20 @@ INDIRECT_WRITE(shm_io_base, 0xFF); /* Write anything to this address.*/ #endif #ifdef LPC_MEMORY - *ce_high = 0; + mmio_writeb(0, ce_high); #endif return 0; } +int it85_spi_read(struct flashchip *flash, uint8_t * buf, int start, int len) +{ + return spi_read_chunked(flash, buf, start, len, 64); +} + +int it85_spi_write_256(struct flashchip *flash, uint8_t * buf, int start, int len) +{ + return spi_write_chunked(flash, buf, start, len, 64); +} + #endif Modified: trunk/programmer.h ============================================================================== --- trunk/programmer.h Tue Mar 8 01:09:11 2011 (r1278) +++ trunk/programmer.h Tue Mar 8 01:23:49 2011 (r1279) @@ -585,9 +585,11 @@ struct superio probe_superio_ite85xx(void); int it85xx_spi_init(void); int it85xx_shutdown(void); -int it85xx_probe_spi_flash(const char *name); +int it85xx_probe_spi_flash(void); int it85xx_spi_send_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr); +int it85_spi_read(struct flashchip *flash, uint8_t * buf, int start, int len); +int it85_spi_write_256(struct flashchip *flash, uint8_t * buf, int start, int len); /* it87spi.c */ void enter_conf_mode_ite(uint16_t port); Modified: trunk/spi.c ============================================================================== --- trunk/spi.c Tue Mar 8 01:09:11 2011 (r1278) +++ trunk/spi.c Tue Mar 8 01:23:49 2011 (r1279) @@ -58,8 +58,8 @@ { /* SPI_CONTROLLER_IT85XX */ .command = it85xx_spi_send_command, .multicommand = default_spi_send_multicommand, - .read = ich_spi_read, - .write_256 = ich_spi_write_256, + .read = it85_spi_read, + .write_256 = it85_spi_write_256, }, { /* SPI_CONTROLLER_IT87XX */ _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
