2011/4/19 Alexander <[email protected]>: > Motherboad - AsRock K10N78, chipset GeForce8200 >
flashrom v0.9.2-r1028 on Linux 2.6.35-24-generic (x86_64), built with libpci > 3.0.0, GCC 4.4.4, little endian > flashrom is free software, get the source code at http://www.flashrom.org > Version 0.9.3 supports your mainboard: http://flashrom.org/trac/flashrom/changeset/1113 > > Calibrating delay loop... OS timer resolution is 1 usecs, 1393M loops per > second, 10 myus = 10 us, 100 myus = 99 us, 1000 myus = 995 us, 10000 myus = > 10247 us, 4 myus = 4 us, OK. > Initializing internal programmer > No coreboot table found. > DMI string system-manufacturer: "To Be Filled By O.E.M." > DMI string system-product-name: "To Be Filled By O.E.M." > DMI string system-version: "To Be Filled By O.E.M." > DMI string baseboard-manufacturer: "ASRock" > DMI string baseboard-product-name: "K10N78" > DMI string baseboard-version: " " > DMI string chassis-type: "Desktop" > Found chipset "NVIDIA MCP78S", enabling flash write... chipset PCI ID is > 10de:075c, This chipset is not really supported yet. Guesswork... > ISA/LPC bridge reg 0x8a contents: 0x40, bit 6 is 1, bit 5 is 0 > Guessed flash bus type is SPI > Found SMBus device 10de:0752 at 00:01:1 > SPI BAR is at 0xf9e80000, after clearing low bits BAR is at 0xf9e80000 > SPI control is 0xc05a, enable=0, idle=0 > Please send the output of "flashrom -V" to [email protected] to help > us finish support for your chipset. Thanks. > SPI on this chipset is not supported yet. > OK. > This chipset supports the following protocols: None. > 8< > No EEPROM/flash device found. > Note: flashrom can never write if the flash chip isn't found automatically. >
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
