Author: stefanct
Date: Wed May 18 03:32:16 2011
New Revision: 1313
URL: http://flashrom.org/trac/flashrom/changeset/1313

Log:
add board enable for AOpen i975Xa-YDG

Success report:
http://www.flashrom.org/pipermail/flashrom/2010-October/005046.html

Signed-off-by: Joshua Roys <[email protected]>
Acked-by: Idwer Vollering<[email protected]>

Modified:
   trunk/board_enable.c

Modified: trunk/board_enable.c
==============================================================================
--- trunk/board_enable.c        Wed May 18 03:32:09 2011        (r1312)
+++ trunk/board_enable.c        Wed May 18 03:32:16 2011        (r1313)
@@ -1580,6 +1580,28 @@
 
 /*
  * Suited for:
+ *  - AOpen i975Xa-YDG: i975X + ICH7 + W83627EHF
+ */
+static int board_aopen_i975xa_ydg(void)
+{
+       int ret;
+
+       /* vendor BIOS ends up in LDN6... maybe the board enable is wrong,
+        * or perhaps it's not needed at all?
+        * the regs it tries to touch are 0xF0, 0xF1, 0xF2 which means if it
+        * were in the right LDN, it would have to be GPIO1 or GPIO3
+        */
+/*
+       ret = winbond_gpio_set(0x2e, WINBOND_W83627EHF_ID, x, 0)
+       if (!ret)
+*/
+               ret = intel_ich_gpio_set(33, 1);
+
+       return ret;
+}
+
+/*
+ * Suited for:
  *  - Acorp 6A815EPD: socket 370 + intel 815 + ICH2
  */
 static int board_acorp_6a815epd(void)
@@ -1945,6 +1967,7 @@
        {0x1106, 0x3177, 0x17F2, 0x3177,  0x1106, 0x3148, 0x17F2, 0x3148, NULL, 
        NULL, NULL,           P3, "Albatron",    "PM266A Pro",            0,   
OK, w836xx_memw_enable_2e},
        {0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, NULL, 
       "artecgroup", "dbe61", P3, "Artec Group", "DBE61",                 0,   
OK, board_artecgroup_dbe6x},
        {0x1022, 0x2090,      0,      0,  0x1022, 0x2080,      0,      0, NULL, 
       "artecgroup", "dbe62", P3, "Artec Group", "DBE62",                 0,   
OK, board_artecgroup_dbe6x},
+       {0x8086, 0x277c, 0xa0a0, 0x060b,  0x8086, 0x27da, 0xa0a0, 0x060b, NULL, 
        NULL, NULL,           P3, "AOpen",       "i975Xa-YDG",            0,   
OK, board_aopen_i975xa_ydg},
        {0x1039, 0x0741, 0x1849, 0x0741,  0x1039, 0x5513, 0x1849, 0x5513, 
"^K7S41 $",   NULL, NULL,           P3, "ASRock",      "K7S41",                 
0,   OK, w836xx_memw_enable_2e},
        {0x8086, 0x24D4, 0x1849, 0x24D0,  0x8086, 0x24D5, 0x1849, 0x9739, NULL, 
        NULL, NULL,           P3, "ASRock",      "P4i65GV",               0,   
OK, intel_ich_gpio23_raise},
        {0x8086, 0x2570, 0x1849, 0x2570,  0x8086, 0x24d3, 0x1849, 0x24d0, NULL, 
        NULL, NULL,           P3, "ASRock",      "775i65G",               0,   
OK, intel_ich_gpio23_raise},

_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom

Reply via email to