2011/5/30 <[email protected]>: > Hallo Stefan, > > Wir könnten eigentlich deutsch sprechen ;). > > Ja, unsere Kunden benützen auch flashrom. Wir haben usere EFI shell flashing > tool, aber die Kunden benützen das Linux Shell am liebsten, besonders wenn > du viele Clusters/Servers flashen muss. > > Stimmt, das SPI interface in « Intel Chipset Serie 6 » ist fast wie die > vorausgegangen. Es gibt ME protection und special « unlocking sequence » mit > special opcodes. > > Aber mein Problem ist vor diesen Sachen. « chipset_flash_enable » findet > nicht das PCH: > « This chipset supports the following protocols: Non-SPI. > WARNING: No chipset found. Flash detection will most likely fail. » > > und das PCH device_id (Vendor ID:0x8086, Device ID:0x244e ) existiert nicht > in das «chipset_enables » stuct. ( mein PCH heisst Patsburg oder C200 > chipset ). > > Wenn ich « enable_flash_ich10 » Funktion nötige, es funkioniert auch nicht. > Maximum FWH chip size: 0x0 bytes BIOS Lock Enable: disabled, > BIOS Write Enable: disabled, BIOS_CNTL is 0x0 tried to set 0xdc to > 0x1 on ICH10 failed (WARNING ONLY) Root Complex Register Block > address = 0x0 Error accessing ICH RCRB, 0x4000 bytes at 0x00000000 > /dev/mem mmap failed: Resource temporarily unavailableIch werde > vielleicht eine neue funktion schreiben ;). > Vielen Dank. > > Mit freundlichen Grüßen > Amine Rebai
It is not very "freundlich" (friendly) to write a reply in an other language than English, given the fact that your first message was written in English. Also, the download named flashrom-bin-x86_64-20081003.tar [1] is behind a 'paywall' / customer login. There is no trace of "flashrom is GPL software" at that website, where can anyone download, if there are any, your patches? Thanks, Idwer [1] http://support.bull.com/ols/product/platforms/hw-extremcomp/bullx-R/dl/toolf/tool > > > > > De : Stefan Tauner <[email protected]> > A : [email protected] > Cc : [email protected] > Date : 27/05/2011 20:02 > Objet : Re: [flashrom] Intel SandyBridge serie 6 chipsets support > ________________________________ > > > On Fri, 27 May 2011 14:58:57 +0200 > [email protected] wrote: > >> Dear Flahsrom representant, > hello! > >> I am a Bios engineer at BULL, a major european server and supercomputer >> company «www.bull.com » . >> >> First of all, I would like to thank you for the great job you are doing, >> we use your utility a lot. > nice to hear that, thank you. is it offered to your customers too? > >> I would like to know if you are planning to support the Bios SPI flash >> flashing on the Intel SandyBridge architecture, especially the Intel 6 >> series chipset/C200/Patsburg platform controller hub? > > the spi interface of the 6 series chipset is very similar to the > previous ones and as long as there is no locking in place (i am talking > about PR0-PR4 and related "security" stuff) it may already work, have > you tried it? > > in case of locking in place (that might be a requirement in nowadays > chipsets due to the requirement of using the ME) flashrom would not > work yet. i am working on this problem within the scope of my google > summer of code project which should be completed by the end of summer. > dont hold your breath though please ;) > > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner > > > _______________________________________________ > flashrom mailing list > [email protected] > http://www.flashrom.org/mailman/listinfo/flashrom > _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
