Dear Yuri,
Am Dienstag, den 31.05.2011, 12:43 +0400 schrieb Yura I: > Hi. I got an error while flashing asus p4p800 motherboard on ubuntu 10.04: > > $ sudo flashrom -w P4C800-ASUS-Entry-1021.005 > flashrom v0.9.1-r946 this version is quite old. 0.9.3 is the current release [1]. You could even build the current version from Subversion [2]. > No coreboot table found. > Found chipset "Intel ICH5/ICH5R", enabling flash write... OK. > This chipset supports the following protocols: Non-SPI. > Calibrating delay loop... OK. > Found chip "SST SST49LF004A/B" (512 KB, FWH) at physical address 0xfff80000. > Flash image seems to be a legacy BIOS. Disabling checks. > Writing flash chip... Erasing flash chip... ERASE FAILED at 0x00000ae8! > Expected=0xff, Read=0x44, failed byte count from 0x00000000-0x00000fff: > 0x4fb > ERASE FAILED! > ERASE FAILED at 0x00000ae8! Expected=0xff, Read=0x44, failed byte count > from 0x00000000-0x0000ffff: 0xf419 > ERASE FAILED! > FAILED! > ERASE FAILED! > FAILED! > Your flash chip is in an unknown state. > Get help on IRC at irc.freenode.net (channel #flashrom) or > mail [email protected]! > ------------------------------------------------------------------------------- > DO NOT REBOOT OR POWEROFF! > > Old bios is saved. Computer isnt rebooted. Can you help me? I suggest to try 0.9.3 or the development version. But to be sure you should wait for an answer by a developer or ask on IRC. Thanks, Paul [1] http://flashrom.org/Flashrom [2] http://flashrom.org/Downloads
signature.asc
Description: This is a digitally signed message part
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
