Hi, see patch.
Not sure if I should mark the SST25VF040.REMS as supported too? The code worked too, but it's not the correct chip, of course. Uwe. -- http://hermann-uwe.de | http://sigrok.org http://randomprojects.org | http://unmaintained-free-software.org
Mark the GIGABYTE GA-8I945GZME-RH and SST25LF040A.RES as supported. Success report: http://www.flashrom.org/pipermail/flashrom/2011-June/006797.html lspci and other info: http://www.flashrom.org/pipermail/flashrom/2010-August/004531.html Signed-off-by: Uwe Hermann <[email protected]> Index: flashchips.c =================================================================== --- flashchips.c (Revision 1339) +++ flashchips.c (Arbeitskopie) @@ -5519,7 +5519,7 @@ .model_id = SST_SST25VF040_REMS, .total_size = 512, .page_size = 256, - .tested = TEST_OK_PROBE, + .tested = TEST_OK_PREW, .probe = probe_spi_res2, .probe_timing = TIMING_ZERO, .block_erasers = Index: print.c =================================================================== --- print.c (Revision 1339) +++ print.c (Arbeitskopie) @@ -515,6 +515,7 @@ B("GIGABYTE", "GA-7DXR", 1, "http://www.gigabyte.de/Products/Motherboard/Products_Spec.aspx?ProductID=1302";, NULL), B("GIGABYTE", "GA-7VT600", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1666";, NULL), B("GIGABYTE", "GA-7ZM", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1366";, "Works fine if you remove jumper JP9 on the board and disable the flash protection BIOS option."), + B("GIGABYTE", "GA-8I945GZME-RH", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=2304";, NULL), B("GIGABYTE", "GA-8IP775", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1830";, NULL), B("GIGABYTE", "GA-8IRML", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1343";, NULL), B("GIGABYTE", "GA-8PE667 Ultra 2", 1, "http://www.gigabyte.com/products/product-page.aspx?pid=1607";, NULL),
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
